Norfolk · England
Bath Repair for Moulton St Mary homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Moulton St Mary and across Norfolk. Send photos for a free, fixed quote.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips caused by builders
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Usually one visit, start to finish
- Same prices wherever you are
- Colour-matched on site
- Fixed prices from your pictures
Read our full price list and guide to resurfacing and replacement costs.
Bath repair in Moulton St Mary without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair whirlpool & spa baths, acrylic and pressed steel enamel, and people most often call us about deep scratches in acrylic and a cracked acrylic bath.
A one-year guarantee comes as standard.
- Location
- Moulton St Mary (NR13)
- Region
- Norfolk
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Moulton St Mary
Other services in Moulton St Mary
How we price bath repair
Prices start from £95. Prices are worked out job by job. The main factors are:
- How many items we do on one visit
- Unusual colours or finishes
- Where the damage is and how we get to it
- What the surface is made of
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- One picture of the entire bath
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Details of any past repairs
If you are in Moulton St Mary and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What happens on the day
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take a morning or an afternoon, and you can get on with other things while we’re there.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Let us know which floor the room is on
- Open a window if you can
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
About Moulton St Mary
Moulton St Mary is about 8 miles west of Great Yarmouth, in Norfolk. Whether you are in the middle of Moulton St Mary or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 797 places in Norfolk, from the larger towns to small villages.
We work across NR13 and the streets around it. Jobs here include addresses on Morley Road, Reedham Road and Acle Road. If you’re just outside Moulton St Mary, we cover Beighton (1 mile west), South Burlingham (1 mile west), Damgate (1 mile north), Tunstall (1 mile east) and Halvergate (2 miles east). Within a short drive, we also cover Norwich (10 miles west), Great Yarmouth (8 miles east), Gorleston-on-Sea (8 miles east), Sprowston (10 miles west), Thorpe St Andrew (8 miles west) and Southtown (8 miles east).
Near you in Moulton St Mary
Typical jobs here are in homes near Church of All Saints and Acle Academy. For rail, the closest station is Acle station, about 1.4 miles north. Further afield, we also cover the area around Strumpshaw Hall Steam Museum (3.2 miles west) and Claxton Castle (4.5 miles south-west). Open spaces near Moulton St Mary include Buckenham Marshes RSPB reserve and South Walsham Broad.
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
FAQs for Moulton St Mary
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Do you come to Moulton St Mary?
We do. We send a technician to Moulton St Mary for every job, with no extra charge for travel.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Do the materials smell?
There may be a mild smell during the work.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Landlord and trade work in Moulton St Mary
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Moulton St Mary as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Honest limits
To be straight with you, some problems need a different fix:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we can’t reach from underneath
Send us pictures and we will tell you honestly.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
Keeping it looking good
Aftercare is simple:
- If an acrylic bath flexes, have its feet adjusted
- Get a dripping tap fixed promptly
- Put a towel in the bath if you are working above it
- Store metal items away from the bath
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
