Derbyshire · England
Bath chip & crack repair in Mount Pleasant, Derbyshire
Our technicians come to Mount Pleasant for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Snagging damage from a refit
Bath repair in Mount Pleasant, done in place
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Common call-outs are for hairline or through cracks in acrylic and damage done while the bathroom was being fitted, on acrylic, whirlpool & spa baths and pressed steel enamel.
Every repair comes with a one-year guarantee.
- Area
- Mount Pleasant (DE11)
- County
- Derbyshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes two to three hours for most chips in most cases. We leave the room clean.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Towns and villages near Mount Pleasant
Also in Mount Pleasant
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Give the bath a quick rinse after use
- A dripping tap stains enamel, so fix it early
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t leave a fresh chip for long
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
When we’d advise against a repair
We will not take on work that won’t last, so these are the limits:
- Cracks in acrylic we can’t reach from underneath
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Your questions about bath repair in Mount Pleasant
Do you cover Mount Pleasant?
We do. Technicians travel to Mount Pleasant from across the region, and the price is the same as everywhere else.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
What areas do you cover?
Everywhere in the UK, Mount Pleasant included. Travel is included in the price.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Mount Pleasant and nearby
Mount Pleasant is about 2 miles south of Swadlincote, in Derbyshire. Wherever you are in the DE11 postcode area, we come to you. Mount Pleasant is one of 532 towns and villages in Derbyshire where we work. You can also see our page for Birmingham, about 24 miles away.
Here we cover the DE11 postcode area. Streets in the area include Mount Pleasant Road and Fields Lane, and we cover them all. We also cover the places around Mount Pleasant: High Cross Bank (1 mile north-west), Linton Heath (1 mile south-west), Church Gresley (1 mile north-east), Castle Gresley (1 mile north-west) and Linton (1 mile south-west). Further out, we also cover Hilton (8 miles north), Measham (4 miles south-east), Melbourne (8 miles north-east), Chellaston (10 miles north-east), Borrowash (14 miles north-east) and Breaston (15 miles north-east).
Near you in Mount Pleasant
We visit homes around Linton Primary School, The Pingle School and Parish Church of St Mary and Saint George and the streets around them. The nearest railway station is Burton-On-Trent station, roughly 4.7 miles north-west of the centre. Other landmarks nearby include Sharpe's Pottery Museum (1.6 miles north-east) and Burton upon Trent Infirmary (4.3 miles north-west).
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- How much damage there is
- The material
- Where the damage is and how we get to it
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Any details about the material
For a price in Mount Pleasant, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Signs you need bath repair in Mount Pleasant
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a picture if you notice any of these:
- A hole punched through by something heavy
- Rusty patches near the plughole
- A cracked acrylic bath
- A kit repair that didn’t last
What to look for in a quote
- How long the guarantee is and what it covers
- When it can be used again
- What aftercare is recommended
- What preparation is included
About our accreditations · Every repair comes with a one-year guarantee.
