Derbyshire · England
Bath re-enamelling & resurfacing in Mount Pleasant, Derbyshire
Fixed-price bath re-enamelling in Mount Pleasant and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste
Common questions in Mount Pleasant
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Are there extra charges for Mount Pleasant?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Do you work in Mount Pleasant?
Yes, we do. Repair technicians travel to Mount Pleasant from across the region, and the price is the same as everywhere else.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
How we handle bath re-enamelling in Mount Pleasant
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with thin, worn enamel in places and a coloured bath you want in white, we can help.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Mount Pleasant (DE11)
- County
- Derbyshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It generally takes the best part of a day, and you’re welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
What affects the price in Mount Pleasant
Prices start from £350. There’s no area surcharge for Mount Pleasant. What changes the price is:
- The colour and finish to match
- The type of damage
- How much damage there is
- What the surface is made of
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
What a repair cannot fix
We will always be straight with you, so here’s what a repair cannot fix:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Towns and villages near Mount Pleasant
Other services in Mount Pleasant
Common problems we fix in Mount Pleasant
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Clients usually contact us about:
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- Wear marks under the taps
Comparing quotes
- How changes to the job are handled
- If travel is included in the price
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Mount Pleasant use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Get any chip repaired quickly
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About Mount Pleasant
Mount Pleasant is about 2 miles south of Swadlincote, in Derbyshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Mount Pleasant is one of 532 towns and villages in Derbyshire we cover. We work right across the region, from Mount Pleasant to Birmingham (24 miles away).
Our repair technicians cover all of DE11. Whether you live on Mount Pleasant Road and Fields Lane or anywhere nearby, a technician can come to you. We also cover the places around Mount Pleasant: High Cross Bank (1 mile north-west), Linton Heath (1 mile south-west), Church Gresley (1 mile north-east), Castle Gresley (1 mile north-west) and Linton (1 mile south-west). Within a short drive, we also cover Hilton (8 miles north), Measham (4 miles south-east), Melbourne (8 miles north-east), Chellaston (10 miles north-east), Borrowash (14 miles north-east) and Breaston (15 miles north-east).
What’s near Mount Pleasant
Locally, our jobs take us to homes close to Linton Primary School, The Pingle School and Parish Church of St Mary and Saint George. For rail, the closest station is Burton-On-Trent station, roughly 4.7 miles north-west. Other landmarks nearby include Sharpe's Pottery Museum (1.6 miles north-east) and Burton upon Trent Infirmary (4.3 miles north-west).
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- CHAS and Constructionline accredited
- No need to remove anything
- One price list for the entire UK
- Most jobs done in one visit
Take a look at our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
