Shropshire · England
Bath Repair for Nantmawr homes
We travel to Nantmawr for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
How we handle bath repair in Nantmawr
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Common call-outs are for chips along the edge of the bath and chips under the taps, across pressed steel enamel, roll-top & freestanding and whirlpool & spa baths.
Every repair is covered by our one-year guarantee, wherever you are in Shropshire.
- Location
- Nantmawr (SY10)
- Region
- Shropshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
If you manage property in Nantmawr, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Repair or replace: which is better?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Colour-matched on site
- Rooms protected and left tidy
- One price list for the entire UK
- Every repair guaranteed for a year
Take a look at our prices page or guide to resurfacing and replacement costs.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Have a window or extractor fan available
Ask for a price
Email us photos of the damage and a wider shot of the whole item, with your SY10 postcode, and we’ll come back with a fixed quote.
Related advice
Your questions about bath repair in Nantmawr
What happens once I’ve sent pictures?
You’ll get a fixed quote back. You are under no obligation.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Will the repair show?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Shropshire.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Towns and villages near Nantmawr
Also in Nantmawr
Common problems we fix in Nantmawr
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move.
Clients normally contact us about:
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
- Holes from dropped items
- Chips caused by builders
Questions to ask before you book
- How long it needs to cure
- What happens if they find more damage
- What preparation is included
- How to care for the finish
About Nantmawr
Nantmawr is about 4 miles south-west of Oswestry, in Shropshire. Across the SY10 area, we carry out the work at your property. We work in all 433 towns and villages across Shropshire, from the larger towns to small villages. You can also see our page for Liverpool, about 42 miles away.
Jobs in SY10 work the same way as everywhere else we cover. If you’re just outside Nantmawr, we cover Treflach (1 mile north-east), Porth-y-waen (1 mile south-east), Trefonen (1 mile north), Whitehaven (1 mile east) and Pant (2 miles south-east). Further out, we also cover Oswestry (4 miles north-east), Oxon (15 miles south-east), Ellesmere (11 miles north-east), Shelton (15 miles south-east), Gobowen (6 miles north-east) and St Martins (9 miles north-east).
What’s near Nantmawr
Further afield, we also cover the area around Robert Jones and Agnes Hunt Orthopaedic Hospital (5.8 miles north-east) and Carreghofa Castle (1.5 miles south). Green spaces nearby include Llanymynech Hill.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
When a repair isn’t the answer
It helps to know what we can’t do:
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
