Shropshire · England

Bath Repair in Treflach

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Treflach, with a one-year guarantee on every repair.

  • Repairs from £95
  • Impact holes in acrylic
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Treflach

Questions from Treflach

Can you redo an old repair?

Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.

What information do you need?

Send pictures through the quote form or call 0345 017 0787.

Can you repair a chip on a coloured bath?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Can you repair a crack in an acrylic bath?

Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Is repairing better than replacing?

Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your photos and we’ll quote them together.

About our bath repair in Treflach

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. If you’re dealing with a chipped rim or side and impact holes in acrylic, we can normally put it right, whatever the material.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Treflach (SY10)
Area hub
Shropshire
Cover
12 months on all our work
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why book with us

  • Fixed prices from your pictures
  • Technicians who travel to you, UK-wide
  • Most jobs done in one visit
  • Nothing taken out or refitted

See our full price list and resurfacing vs replacement cost guide.

Treflach and nearby

Treflach is about 3 miles south-west of Oswestry, in Shropshire. Wherever you are in the SY10 postcode area, a technician comes to you. Treflach is one of 433 towns and villages in Shropshire where we work. We work right across the region, from Treflach to Liverpool (about 41 miles away).

Jobs in SY10 work the same way as everywhere else we cover. You’ll find streets such as Offas Close, Gibraltar Lane and Oak Lane, and we cover them all. We also travel to Porth-y-waen (1 mile south), Trefonen (1 mile north), Whitehaven (1 mile south-east), Llynclys (2 miles east) and Morda (2 miles north-east). We also work in nearby towns such as Oswestry (3 miles north-east), Oxon (14 miles south-east), Ellesmere (10 miles north-east), Shelton (15 miles south-east), Gobowen (6 miles north-east) and St Martins (8 miles north-east).

Local landmarks in Treflach

Locally, our jobs take us to homes close to All Saints and Trefonen CofE Primary School. Further afield, we also cover the area around Carreghofa Castle (1.9 miles south) and Robert Jones and Agnes Hunt Orthopaedic Hospital (5.3 miles north-east). The countryside around Treflach includes Llanymynech Hill.

Map of Treflach © OpenStreetMap contributors

How the visit works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, normally by the following day, the bath is ready to use.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park
  • Tell us about any previous repairs or coatings

Get a quote

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Related advice

When we’d advise against a repair

We would rather lose a job than do one that won’t last, so these are the limits:

  • Metal that has corroded all the way through
  • Flexing caused by a failed cradle or loose feet
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Not sure? Send pictures and we will give you a straight answer before you book.

Surfaces we repair

  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

Landlord and trade work in Treflach

For developers and builders, we fix damage before handover. We can visit several plots in one trip.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Aftercare tips

Looking after the surface is easy:

  • Protect the bath with a towel when doing jobs nearby
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Check that an acrylic bath does not move when you stand in it
  • Keep abrasive pads and gritty cleaners away from the bath

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.

When to call us in Treflach

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.

Send us a picture if you notice any of these:

  • A chip where the taps sit
  • Snagging damage from a refit
  • Holes from dropped items
  • Cracks in an acrylic bath

Comparing quotes

  • How soon you can use it again
  • Whether the price covers travel
  • Who will actually do the work
  • Aftercare advice

Choosing a repair company

What bath repair costs

Prices start from £95. Prices are worked out job by job, from your pictures. The main factors are:

  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • Doing more than one item at once
  • What the surface is made of

What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Getting a price from photos

Good photos mean an accurate price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area
  • Your postcode, so we can check dates
  • A photo taken from further back

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.