Lancashire · England
Bath chip & crack repair in New Gate, Lancashire
Bath repair across New Gate and nearby, usually in one visit.
- Repairs from £95
- Chips caused by builders
- Deep scratches in acrylic
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Bath repair in New Gate without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with rust by the waste and overflow and damage beneath the taps, we can generally put it right.
Every job is backed for twelve months in New Gate and everywhere else. We return to put right any problem with the work.
- Area
- New Gate (PR4)
- Region
- Lancashire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to New Gate
Other services in New Gate
When to call us in New Gate
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
People normally call us when they notice something like this:
- An old repair that has yellowed or come loose
- Damage beneath the taps
- Rusty patches near the plughole
- Chips along the edge of the bath
Comparing quotes
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- Whether the price covers travel
- Whether a trained technician does the job
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes two to three hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the day after.
Before we arrive
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
- Open a window if you can
Ask for a price
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say right away whether it can be repaired.
Related advice
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What affects the price in New Gate
Repairs from £95. Prices are worked out job by job. The main factors are:
- How much damage there is
- Whether we combine several jobs
- What the surface is made of
- Whether old repairs or coatings need taking off
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole bath
- Any details about the material
- Something in shot to show the size
- Your postcode, so we can check dates
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
How to look after the repair
Most damage we see is avoidable. These habits help:
- A dripping tap stains enamel, so fix it early
- Store metal items away from the bath
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Questions from New Gate
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How do I get a price for bath repair in New Gate?
Prices start from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
New Gate and nearby
New Gate is about 1 mile south of Penwortham, in Lancashire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We cover 482 places in Lancashire. Our jobs stretch from New Gate to Liverpool (23 miles away).
Here we cover the PR4 postcode area. You will find streets such as Chain House Lane, Falcon Court and Penwortham Way, and we cover them all. If you’re just outside New Gate, we cover White Stake (1 mile north-west), Farington Moss (1 mile south), New Longton (1 mile west), Penwortham (1 mile north) and Howick Cross (2 miles north-west). Larger places within reach include Preston (3 miles north), Chorley (6 miles south-east), Lytham St Anne's (12 miles west), Accrington (15 miles east), Fulwood (4 miles north) and Skelmersdale (12 miles south).
Near you in New Gate
Our clients here include homes close to The Plough Inn, Farington Moss St. Paul's C.E. Primary School and St Paul's Church, among other places. The nearest railway station is Lostock Hall station, about 1.3 miles east. Nearby you will also find Tulketh (2.8 miles north) and British Commercial Vehicle Museum (2.2 miles south-east). The countryside around New Gate includes Brockholes.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we can’t get to from below
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why choose Surface Doctor in New Gate
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Colour mixed on the day to match
Read our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
