Leicestershire · England
Bath chip & crack repair in Newbold, Leicestershire
We travel to Newbold for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rust spots around the plughole
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Bath repair in Newbold without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in a single visit. Whether it’s a cracked acrylic bath and a chip where the taps sit, we can help, on acrylic, whirlpool & spa baths and pressed steel enamel alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Newbold (LE14)
- Region
- Leicestershire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Newbold
Prices start from £95. Prices are worked out job by job. What matters most is:
- How many areas need work
- Access to the area
- The type of damage
- Any earlier repairs that need removing first
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- Where you are, by postcode
- Details of any past repairs
- One picture of the entire bath
- A coin beside the damage so we can judge size
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll say right away if a repair is the right fix.
Places near Newbold
Also in Newbold
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Getting a price
For a price in Newbold, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Common problems we fix in Newbold
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Keep an eye out for these signs:
- An old repair that has yellowed or come loose
- Holes from dropped items
- Chips along the edge of the bath
- Chips under the taps
Before booking anyone
- What happens if they find more damage
- How your room will be protected
- Who will actually do the work
- What aftercare is recommended
Common questions in Newbold
Which areas do you work in?
The entire UK, including all of Leicestershire. Just include your postcode and we’ll offer you dates.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
I tried a repair kit. Can you fix it?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Newbold. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Newbold
- Honest advice, even when it means no job
- Same prices wherever you are
- No need to remove anything
- CHAS and Constructionline accredited
See our full price list or bath cost comparison.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Looking after it afterwards
It’s all simple stuff:
- If an acrylic bath flexes, have its feet adjusted
- Do not leave razors or cans standing in the bath
- Fix dripping taps early to stop staining and limescale
- Rinse the bath after use, especially in hard water areas
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Where we work around Newbold
Newbold is about 6 miles west of Oakham, in Leicestershire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Newbold is one of 287 places in Leicestershire where we work. Our jobs stretch from Newbold to Birmingham (45 miles away).
Our visits in LE14 work the same way as everywhere else we cover. We also travel to Owston (1 mile south-east), Somerby (1 mile north-east), Burrough on the Hill (1 mile north), Pickwell (2 miles north-east) and Knossington (2 miles east). We also work in nearby towns such as Wigston (12 miles south-west), Melton Mowbray (6 miles north), Syston (9 miles west), Blaby (15 miles south-west), Sileby (11 miles west) and Groby (15 miles west).
Near you in Newbold
Typical jobs here are in homes near Somerby Primary School and St Andrew's Church, among other places. Nearby you’ll also find Sauvey Castle (2.7 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
