Leicestershire · England

Bath chip & crack repair in Melton Mowbray, Leicestershire

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Melton Mowbray. Send photos for a free, fixed quote.

  • Repairs from £95
  • Rust spots around the plughole
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Melton Mowbray?

How we handle bath repair in Melton Mowbray

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our repair technicians work on cast iron enamel, whirlpool & spa baths and roll-top & freestanding, and people most frequently call us about scratches you can feel with a fingernail and cracks in an acrylic bath.

Big or small, you get the same one-year guarantee in Melton Mowbray and across Leicestershire.

Before and after: a damaged acrylic bath corner repaired in place
Area
Melton Mowbray (LE13)
Area hub
Leicestershire
Guarantee
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

Landlord and trade work in Melton Mowbray

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Why repair rather than replace?

Swapping a damaged bath for a new one usually means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Melton Mowbray. What changes the price is the job itself: the material, the amount of damage and how many items.

What you get with us

  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • No extra charge for your area
  • Nothing taken out or refitted

Read our prices page or bath cost comparison.

The process

We agree an arrival time beforehand, so you are not left guessing. On site, it takes a few hours, depending on the damage. We leave the room clean and ready to use once it has cured.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, normally by the next day, the bath is ready to use.

Before we arrive

  • Let us know if it has been repaired before
  • Mention any parking restrictions or tricky access
  • Clear toiletries, mats and anything else from around the area

Getting a price

Most customers in Melton Mowbray get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed price

Read more

Covering Melton Mowbray

Melton Mowbray is about 14 miles north-east of Leicester, in Leicestershire. Jobs in Melton Mowbray are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Melton Mowbray is one of 287 towns and villages in Leicestershire where we work. We work right across the region, from Melton Mowbray to Birmingham (about 47 miles away).

We work across the LE13 postcode area. You’ll find streets such as Nottingham Street, Leicester Street and St Mary's Close, all of which we cover. You will find Melton Mowbray on the A606 and A607, which makes it straightforward to reach. Neighbouring places we cover include Thorpe Arnold (1 mile north-east), Burton Lazars (2 miles south-east), Brentingby (2 miles east), Wyfordby (3 miles east) and Great Dalby (3 miles south). Further out, we also cover Loughborough (14 miles west), Syston (9 miles south-west), Shelthorpe (13 miles west), Sileby (9 miles west), East Leake (13 miles west) and Mountsorrel (11 miles west). Melton Mowbray is among the bigger towns we cover in Leicestershire.

Near you in Melton Mowbray

Around Melton Mowbray, we work in homes near Long Field Academy, The White Lion Public House and Baptist Chapel. You’ll also find King Edward VII School (1 mile south-east) and The Grove Primary School (under half a mile west). There’s a railway station in Melton Mowbray itself: Melton Mowbray station. Further afield, we also cover the area around The Mount motte at Melton Mowbray (under half a mile south-west). Open spaces near Melton Mowbray include Ankle Hill.

Map of Melton Mowbray © OpenStreetMap contributors

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

How we price bath repair

Repairs from £95. We give every job a fixed quote from pictures. These are the things that affect it:

  • Doing more than one item at once
  • Where the damage is and how we get to it
  • What kind of damage it is
  • Previous DIY repairs that have to come out

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Getting a price from photos

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale
  • One picture of the whole bath
  • The material, if you know it

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

Honest limits

To be straight with you, there are a few things a repair won’t fix:

  • Water coming from the waste or taps rather than the bath
  • Flexing caused by a failed cradle or loose feet
  • A bath worn all over, where resurfacing makes more sense

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel

Common questions in Melton Mowbray

What happens once I’ve sent pictures?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

Do I need to be at home?

We need someone to let us in. You do not need to watch us work.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Can a cracked acrylic bath be fixed?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

What areas do you cover?

The whole UK, including all of Leicestershire. Just include your postcode and we’ll offer you dates.

Can you repair a hole in a bath?

In most cases. Send us a picture of the hole and one from under the bath if you can.

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

When to call us in Melton Mowbray

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

If you can see any of these, send us a picture:

  • A chipped rim or side
  • Cracks in an acrylic bath
  • An old repair that has yellowed or come loose
  • Damage beneath the taps

What to look for in a quote

  • How to care for the finish
  • Whether the colour is mixed to match
  • How soon you can use it again
  • The length of the guarantee and what it covers

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.