Northamptonshire · England

Bath chip & crack repair in Newbottle, Northamptonshire

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Newbottle. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Chips caused by builders
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Newbottle?

Bath repair in Newbottle, done in place

Most of our bath repairs take a few hours, and the bath is back in use the day after. You won’t need a plumber or tiler, because nothing is disconnected. Whether it’s a hole punched through by something heavy and scuffs and scratches in the surface, we can typically put it right, whatever the material.

All our work is covered by our one-year guarantee, wherever you are in Northamptonshire.

Before and after: a chipped, rust-stained bath around the plughole
Where
Newbottle (OX17)
Region
Northamptonshire
Guarantee
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Rinse it down after each bath
  • Clean with warm water and a mild detergent
  • Check that an acrylic bath doesn’t move when you stand in it
  • Avoid scourers, wire wool and gritty cream cleaners

Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

How we price bath repair

Prices start from £95. We give every job a fixed price from pictures. These are the things that affect it:

  • How many items we do on one visit
  • What the surface is made of
  • Unusual colours or finishes
  • Any earlier repairs that need removing first

Our prices are the same across the UK, so there’s no premium for Newbottle. The job itself decides the price: the material, the amount of damage and how many items.

How to get a fixed price

Two or three clear pictures are usually enough. Try to include:

  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • The material, if you know it
  • Whether it’s been repaired or coated before

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

What we cannot put right

In fairness, some problems need a different fix:

  • Flexing caused by a failed cradle or loose feet
  • Rust that has eaten right through a steel bath
  • Wear across the whole surface, which needs re-enamelling

If in doubt, send photos and we’ll say what we think.

Surfaces we repair

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Northamptonshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

What happens on the day

Here’s how a visit usually runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a few hours, depending on the damage. Before we go, we’ll explain how long to leave it and how to look after it.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on

Getting a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Send pictures for a quote

Related advice

Our work in Newbottle

Newbottle is about 4 miles west of Brackley, in Northamptonshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Newbottle is one of 364 places in Northamptonshire where we work. You can also see our page for Birmingham, about 41 miles away.

All of OX17 is covered, from the main roads to the quietest streets. Other places close to Newbottle include Charlton (1 mile south-east), Kings Sutton (1 mile west), Astrop (2 miles west), Farthinghoe (2 miles north-east) and Thenford (3 miles north). Larger places within reach include Brackley (4 miles east), Towcester (13 miles north-east), Hinton (10 miles north), Silverstone (10 miles north-east), Deanshanger (15 miles east) and Adderbury (3 miles west).

What’s near Newbottle

Typical jobs here are in homes near Newbottle and Charlton Church of England Primary School and Church of St James and the streets around them. Newbottle’s nearest station is Kings Sutton station, roughly 1.8 miles west. Nearby you’ll also find Deddington Castle (4.6 miles south-west) and Brackley Community Hospital (4.1 miles east). The countryside around Newbottle includes Farthinghoe Nature Reserve.

Map of Newbottle © OpenStreetMap contributors

Why repair rather than replace?

A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Why book with us

  • Dust sheets down, tidy finish
  • Most jobs done in one visit
  • Same prices wherever you are
  • Fixed prices from your photos

Take a look at our prices page or guide to resurfacing and replacement costs.

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Common questions in Newbottle

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What areas do you cover?

We work UK-wide, so Newbottle is covered. Our prices are the same everywhere.

Do you work in Newbottle?

Yes, we do. Repair technicians travel to Newbottle from across the region, with no extra charge for travel.

Will I be able to see the repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Is there any odour?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is a bath repair permanent?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.

When can I have a bath again?

Most baths can be used the next day. We will tell you the exact curing time when we finish.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.