Gloucestershire · England
Bath chip & crack repair in Newport, Gloucestershire
Bath repair for Newport, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our bath repair in Newport
A typical bath repair is a few hours’ work, and you can typically bathe again the day after. There is no need to book a plumber or tiler, because the bath doesn’t move. Our technicians work on acrylic, cast iron enamel and roll-top & freestanding, and the jobs we see most are impact holes in acrylic and snagging damage from a refit.
Big or small, you get the same one-year guarantee.
- Where
- Newport (GL13)
- County
- Gloucestershire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also in Newport
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
How to look after the repair
It’s all simple stuff:
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Our work in Newport
Newport is about 6 miles north-east of Thornbury, in Gloucestershire. From the centre of Newport to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 470 places in Gloucestershire. You can also see our page for Birmingham, about 59 miles away.
Jobs in GL13 are booked in the same way as anywhere else. From Church View, Kingfisher Way and Tyndale Rise or anywhere nearby, a technician can come to you. Neighbouring places we cover include Berkeley Heath (1 mile north), Swanley (1 mile south), Woodford (1 mile south), Ham (1 mile west) and Berkeley (1 mile north-west). Further out, we also cover Gloucester (15 miles north-east), Stroud (10 miles north-east), Quedgeley (12 miles north-east), Lydney (5 miles north-west), Tredworth (15 miles north-east) and Kingsway Village (12 miles north-east).
What’s near Newport
Newport’s nearest station is Cam & Dursley station, roughly 4.2 miles north-east of the centre. A little further out are Vale Community Hospital (3.5 miles east) and Berkeley Castle (1.2 miles north-west). Green spaces nearby include WWT Slimbridge.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Newport as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think before booking.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
What we do, step by step
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the day after.
How to prepare
- Make sure the room can be ventilated
- Clear the area around the damage
- Tell us about any previous repairs or coatings
Get a quote
Send us pictures of the damage and a wider shot of the entire item, with your GL13 postcode, and we’ll reply with a fixed quote.
Read more
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Newport
- No extra charge for your area
- Colour mixed on the day to match
- Nothing taken out or refitted
- Generally one visit, start to finish
Read our prices page and guide to resurfacing and replacement costs.
Common questions in Newport
What does bath repair cost?
Repairs from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your GL13 postcode.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Signs you need bath repair in Newport
A cracked acrylic bath usually wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex.
It’s worth getting a quote if you see:
- Scuffs and scratches in the surface
- Cracks in an acrylic bath
- Damage beneath the taps
- Chips along the edge of the bath
What your quote should include
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
