Newry and Mourne · Northern Ireland

Bath chip & crack repair in Newry, Newry and Mourne

We travel to Newry for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Newry?

Bath repair in Newry, done in place

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. Whether it’s deep scratches in acrylic and hairline or through cracks in acrylic, we can help.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Location
Newry (BT34)
County
Newry and Mourne
Cover
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Landlords, agents and businesses in Newry

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Newry as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

About Newry

Newry is in Newry and Mourne. Whether you’re in the middle of Newry or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee.

All of BT34 is covered. We also cover the places around Newry: Newcastle (12 miles east), Banbridge (13 miles north), Portadown (21 miles north-west), Lurgan (22 miles north) and Ballynahinch (22 miles north-east). Remote and island addresses take a little more planning, so it’s best to call first.

Local landmarks in Newry

Further afield, we also cover the area around Narrow Water Castle (5 miles south-west).

Map of Newry © OpenStreetMap contributors

Should you replace it?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Why book with us

  • No extra charge for your area
  • Straight answers about what a repair can do
  • Most jobs done in one visit
  • We come to you, anywhere in the UK

Take a look at our prices page and resurfacing vs replacement cost guide.

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

How the visit works

There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take a morning or an afternoon, including clearing up.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Tell us about parking, stairs or access
  • Have a window or extractor fan available

Get a quote

To get a price, send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.

Get a fixed quote

Advice

When we’d advise against a repair

Before booking, it’s worth knowing the limits too:

  • Flexing caused by a failed cradle or loose feet
  • Wear across the whole surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath

If in doubt, send photos and we will say what we think.

Materials we repair

  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

What bath repair costs

Repairs from £95. Each job gets its own fixed price. This is what makes a difference:

  • Doing more than one item at once
  • The type of damage
  • How much damage there is
  • The material and finish

There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

You can take the photos on your phone, there’s no need for anything special. Make sure they show:

  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit
  • A close-up of the damage, in focus

Email us photos of the damage and a wider shot of the whole item, with your BT34 postcode, and we will reply with a fixed quote.

Looking after it afterwards

Once the work has cured, treat it gently:

  • Do not scrub with anything abrasive
  • Get any new chip repaired before it rusts
  • Stick to mild cleaners and a soft cloth
  • Check that an acrylic bath does not move when you stand in it

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

FAQs for Newry

How invisible is a bath repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

Can I add another job to the visit?

Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Is it worth repairing rather than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Do you cover Newry?

Yes. We work across the UK and come to Newry and the rest of Newry and Mourne. Send us pictures for a fixed quote, or call 0345 017 0787.

Something went through my bath. Can it be fixed?

Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.