Newry and Mourne · Northern Ireland

Bath and surface repairs in BT34

Based in BT34? We cover Newry and the rest of the district, repairing in place.

Surface repairs across BT34

Bath repair at your home in BT34

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Our repair technicians work on pressed steel enamel, acrylic and roll-top & freestanding, and common reasons people contact us are an old repair that has yellowed or come loose and scratches you can feel with a fingernail.

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes two to three hours for most chips. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

What you’ll pay

Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why clients in BT34 choose us

  • One price list for the entire UK
  • Fixed prices from your pictures
  • We’ll tell you if it’s not worth repairing
  • Every repair guaranteed for a year

Ask for a price

Most clients in BT34 get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Local landmarks in Newry

A little further out are Narrow Water Castle (5 miles south-west).

Signs you need bath repair

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.

The most common problems we are called about are:

  • Scuffs and scratches in the surface
  • Snagging damage from a refit
  • Chips along the edge of the bath
  • A cracked acrylic bath

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

How to look after the repair

Good habits make a big difference to how long a repair lasts:

  • Cover the bath during DIY or decorating
  • Do not leave razors or cans standing in the bath
  • If an acrylic bath flexes, have its feet adjusted
  • Get a dripping tap fixed promptly

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

What bath repair costs

Repairs from £95. We charge the same across the UK, including BT34. The price reflects:

  • How many items we do on one visit
  • What the surface is made of
  • What kind of damage it is
  • Any earlier repairs that need removing first

Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Send photos for a quote

Photographing the damage takes a minute, and it saves a visit. Please include:

  • The material, if you know it
  • Where you are, by postcode
  • Details of any past repairs
  • A coin or ruler next to the damage for scale

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Cracks in acrylic we can’t reach from underneath

Questions from BT34

Is there any odour?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Will I be able to see the repair?

We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.

Will the price change on the day?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including older coloured suites.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

How do I book?

Some pictures, your postcode and how to reach you. On the day, access to the room.

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.