Nottinghamshire · England
Bath chip & crack repair in Newton, Nottinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Newton. Free, fixed quotes from your pictures.
- Repairs from £95
- Rust spots around the plughole
- Cracks in an acrylic bath
Bath repair in Newton, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Whether it’s hairline or through cracks in acrylic and scratches you can feel with a fingernail, we can help, on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel alike.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Where
- Newton (NG13)
- County
- Nottinghamshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. Allow a few hours, and we will keep you posted as we go.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Newton
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Common problems we fix in Newton
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
You may need us if you’ve spotted any of these:
- Chips caused by builders
- An old repair that has yellowed or come loose
- Scuffs and scratches in the surface
- Rust by the waste and overflow
What your quote should include
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
More services for Newton
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Aftercare tips
To keep it looking its best for years:
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep metal cans and razors off the surface
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Newton: your questions answered
What does bath repair cost?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
What areas do you cover?
Everywhere in the UK, Newton included. There is no extra charge for travel.
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
How long does the repair take to cure?
Normally by the following day, though it depends on what we have done.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- How easy the damage is to reach
- How many items we do on one visit
- The material
- Unusual colours or finishes
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can typically get a fixed price without us visiting. To make it quick:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- The material, if you know it
- A picture taken from further back
Email us a picture of the damage and a wider shot of the entire item, with your NG13 postcode, and we will reply with a fixed quote.
Newton and the surrounding area
Newton is about 5 miles east of Carlton, in Nottinghamshire. Across the NG13 area, we carry out the work at your property. Our technicians cover 329 places across Nottinghamshire. Our nearest city page is Birmingham, about 51 miles away.
All of NG13 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Main Street, Meteor Close and Battle Close. We also cover the places around Newton: East Bridgford (1 mile north-east), Bingham (1 mile south-east), Gunthorpe (2 miles north), Car Colston (2 miles north-east) and Cropwell Butler (3 miles south). Within a short drive, we also cover Mansfield (15 miles north-west), Beeston (11 miles west), Carlton (5 miles west), Hucknall (11 miles north-west), Newark-on-Trent (10 miles north-east) and West Bridgford (7 miles south-west).
Local landmarks in Newton
Our clients here include homes close to Toot Hill School, East Bridgford St Peters Church of England Academy and St Peter's Church. The nearest railway station is Bingham station, roughly 1.3 miles south-east. Well-known places in the area include Shelford and Newton (1.3 miles north-west) and East Bridgford Pancake Hill (1.2 miles north).
Repairing versus replacing in Newton
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Newton customers choose us
- We will tell you if it’s not worth repairing
- Rooms protected and left tidy
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
