Hampshire · England
Bath Repair in Newton Valence
Problem with your bath in Newton Valence? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Scuffs and scratches in the surface
How it works
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, depending on the damage. Before leaving, we tell you how long to leave it and how to care for it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Open a window if you can
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
How we handle bath repair in Newton Valence
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Whether it’s chips caused by builders and rust spots around the plughole, we can normally put it right, on whirlpool & spa baths, cast iron enamel and acrylic alike.
Big or small, it’s backed by a one-year guarantee in Newton Valence and across Hampshire.
- Location
- Newton Valence (GU34)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Newton Valence
Newton Valence is about 4 miles south of Alton, in Hampshire. Anywhere in GU34, a technician comes to you. Newton Valence is one of 683 towns and villages in Hampshire where we work. Our jobs stretch from Newton Valence to London (47 miles away).
Here we cover the GU34 postcode area. We also cover the places around Newton Valence: Selborne (1 mile east), Empshott (2 miles east), Lower Green (3 miles south-east), Hawkley (3 miles south-east) and Oakshott (3 miles south). Larger places within reach include Basingstoke (13 miles north-west), Winchester (15 miles west), Fleet (14 miles north-east), Horndean (13 miles south), Aldershot (14 miles north-east) and Alton (4 miles north).
Near you in Newton Valence
In Newton Valence, that means homes near Church of St Mary. The nearest railway station is Alton station, roughly 4.2 miles north of the centre. Nearby you will also find Alton Community Hospital (3.4 miles north) and The Romany Museum (1.4 miles east). For a walk, there’s Selborne Hill and Liss Riverside Railway Walk North.
Nearby places to Newton Valence
What else we do in Newton Valence
Why repair rather than replace?
Replacing a fitted bath typically means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Prices start from £95. Our prices are the same across the UK, so there’s no premium for Newton Valence. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- One visit for most repairs
- Dust sheets down, tidy finish
Take a look at our prices page and bath cost comparison.
FAQs for Newton Valence
How long before I can use the bath?
Usually the day after. We confirm the time before we leave.
Which areas do you work in?
All of Hampshire, and the rest of the UK. There’s no extra charge for travel.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Newton Valence use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
What we’re called out for in Newton Valence
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Keep an eye out for any of the following:
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
- Damage beneath the taps
- Impact holes in acrylic
Comparing quotes
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- Who turns up on the day
- Whether the price covers travel
Keeping it looking good
After the repair has cured, a few habits help it last:
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
What affects the price in Newton Valence
Repairs from £95. Every quote is fixed and free. What we look at:
- Unusual colours or finishes
- Where the damage is and how we get to it
- How many items we do on one visit
- The material
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- What it’s made of, if you know
- The postcode, so we can plan the visit
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
