Wigan · England

Bath chip & crack repair in Newtown, Wigan

Bath repair across Newtown and nearby, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Damage beneath the taps
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Newtown

Should you replace it?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why book with us

  • Most jobs done in one visit
  • No need to remove anything
  • A year’s guarantee on all work
  • Same prices wherever you are

See our full price list and bath cost comparison.

Bath repair in Newtown, done in place

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Our technicians work on acrylic, whirlpool & spa baths and roll-top & freestanding, and common reasons people contact us are rust by the waste and overflow and damage beneath the taps.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

Where
Newtown (WN5, WN3, WN6)
County
Wigan
Warranty
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

How to care for the repair

So the finish stays in good condition:

  • Keep metal cans and razors off the surface
  • Rinse it down after each bath
  • Check that an acrylic bath doesn’t move when you stand in it
  • Get any new chip repaired before it rusts

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.

Do you need bath repair in Newtown?

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

People generally call us when they notice something like this:

  • Rust spots around the plughole
  • Chips along the edge of the bath
  • A hole punched through by something heavy
  • Chips caused by builders

Questions to ask before you book

  • If travel is included in the price
  • A fixed quote, and whether VAT is included
  • What happens if the damage is worse than the pictures show
  • How the colour is matched

Choosing a repair company

How it works

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to look after it.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Tell us about parking, stairs or access
  • Let us know if it has been repaired before

How to get a price

For a price in Newtown, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed quote

Related advice

Common questions in Newtown

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do the materials smell?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

How long does the repair take to cure?

Typically the day after. We’ll tell you the exact curing time when we finish.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

How we price bath repair

Repairs from £95. There are no hourly rates or hidden extras. The price is based on:

  • The material and finish
  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off
  • How much damage there is

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.

How to get a fixed price

Most quotes are done from pictures alone. To help us price it:

  • Whether it’s been repaired or coated before
  • A wider photo showing the whole bath
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates

Email us pictures of the damage and a wider shot of the entire item, and tell us you are in Newtown, and we’ll come back with a fixed quote.

Covering Newtown

Newtown is about 1 mile south-west of Wigan, in Wigan. We visit homes and businesses in Newtown, so you don’t need to take anything anywhere. We work in all 63 towns and villages across Wigan, from the larger towns to small villages. Our jobs stretch from Newtown to Liverpool (14 miles away).

Jobs in WN5, WN3 and WN6 work the same way as everywhere else we cover. Jobs here include addresses on Pine Road, Broom Road and Daisy Road. Newtown is on the A577, so it’s easy for us to reach. We also cover the places around Newtown: Wigan (1 mile north-east), Pemberton (1 mile west), Poolstock (1 mile east), Goose Green (1 mile south) and Marsh Green (1 mile north-west). Within a short drive, we also cover Leigh (6 miles south-east), Ashton-in-Makerfield (3 miles south), Hindley (4 miles east), Atherton (7 miles east), Standish (3 miles north) and Tyldesley (8 miles east).

Around Newtown

Our clients here include homes close to St Mark's CofE Primary School, All Saints' Church and Wigan and Leigh College and the streets around them. Nearby too are Laithwaite Park (under half a mile north-west), PEMBEC High School (0.9 miles north-west), Church of St Mark (within half a mile south) and The Prince of Wales pub (under half a mile south-east). The nearest railway station is Pemberton station, about 0.8 miles south-west of the centre. Further afield, we also cover the area around Blackrod Castle Croft (4.9 miles north-east) and Marketgate Shopping Centre (1.2 miles north-east). Open spaces near Newtown include Billinge Hill.

Map of Newtown © OpenStreetMap contributors

Can I fix it myself?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

When we would advise against a repair

It helps to know what we can’t do:

  • Water coming from the waste or taps rather than the bath
  • Acrylic cracks with no access behind them
  • A steel bath rusted through

Not sure? Send photos and we’ll give you a straight answer before booking.

Surfaces we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths

What your bath is made of matters

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.