Cheshire West and Chester · England
Bath chip & crack repair in No Man's Heath, Cheshire West and Chester
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in No Man's Heath. Send photos for a free, fixed quote.
- Repairs from £95
- Chips on the rim or sides
- A kit repair that didn’t last
What affects the price in No Man's Heath
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- How many areas need work
- The type of damage
- The material
The price reflects the work involved, not where you live. You will see the full price before you book.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Bath repair in No Man's Heath, done in place
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Common call-outs are for chips on the rim or sides and scuffs and scratches in the surface, on roll-top & freestanding, cast iron enamel and acrylic.
Big or small, you get the same one-year guarantee in No Man's Heath and across Cheshire West and Chester.
- Location
- No Man's Heath (SY14)
- Area hub
- Cheshire West and Chester
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
We agree an arrival time beforehand. Once we’re there, the work takes a few hours. We leave the room clean.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Before we arrive
- Keep a parking space free if you can
- Make sure the room can be ventilated
- Tell us if there are stairs or a lift
Getting a price
For a price in No Man's Heath, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Why repair rather than replace?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why us?
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- Everything repaired in place
- Honest advice, even when it means no job
See our prices page and resurfacing vs replacement cost guide.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How to care for the repair
So the finish stays in good condition:
- Check that an acrylic bath doesn’t move when you stand in it
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
- Protect the bath with a towel when doing jobs nearby
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Our work in No Man's Heath
No Man's Heath is about 9 miles west of Nantwich, in Cheshire West and Chester. We visit homes and businesses in No Man's Heath, so nothing has to leave your home. We work in 224 places in Cheshire West and Chester, from the larger towns to small villages. You can also see our page for Liverpool, about 28 miles away.
Jobs in SY14 are booked in the same way as anywhere else. Streets in the area include Dean Park, Meadow Court and Cross o' Th' Hill Road, all of which we cover. Neighbouring places we cover include Tushingham (1 mile south-east), Bickley Town (1 mile north-east), Hampton Heath (1 mile north-west), Ebnal (1 mile north-west) and Hetherson Green (1 mile north-east). Larger places within reach include Chester (13 miles north-west), Winsford (14 miles north-east), Boughton (13 miles north-west), Hoole (13 miles north-west), Newtown (14 miles north-west) and Over (13 miles north-east).
Local landmarks in No Man's Heath
We visit homes around Bishop Heber High School and St Chad's Church. The nearest railway station is Whitchurch (Shropshire) station, roughly 4.7 miles south-east of the centre. Further afield, we also cover the area around Tushingham cum Grindley (1.4 miles south-east) and Whitchurch Community Hospital (4.2 miles south-east). Green spaces nearby include Bickerton Hill.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Signs you need bath repair in No Man's Heath
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Send us a photo if you notice any of these:
- Rust by the waste and overflow
- Deep scratches in acrylic
- Damage beneath the taps
- A hole punched through by something heavy
Before you book anyone
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- Who will actually do the work
FAQs for No Man's Heath
How long does the repair take to cure?
Generally within a day, depending on the repair.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you cover the whole of Cheshire West and Chester?
Everywhere in the UK, No Man's Heath included. There is no extra charge for travel.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Nearby places to No Man's Heath
Other services in No Man's Heath
About our accreditations · Every repair comes with a one-year guarantee.
