Cheshire West and Chester · England
Bath chip & crack repair in Ebnal, Cheshire West and Chester
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Ebnal. Send pictures for a free, fixed quote.
- Repairs from £95
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
About our bath repair in Ebnal
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Typical jobs include a kit repair that didn’t last and damage beneath the taps, in acrylic, whirlpool & spa baths and pressed steel enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Ebnal (SY14)
- Area hub
- Cheshire West and Chester
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Aftercare is simple:
- Get a dripping tap fixed promptly
- Don’t scrub with anything abrasive
- Check that an acrylic bath does not move when you stand in it
- Do not leave a fresh chip for long
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Should you replace it?
Many people think a damaged bath means a new one. Generally it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Why book with us
- No need to remove anything
- Rooms protected and left tidy
- One visit for most repairs
- Straight answers about what a repair can do
See our full price list or resurfacing vs replacement cost guide.
Covering Ebnal
Ebnal is about 10 miles east of Wrexham, in Cheshire West and Chester. We travel to homes and businesses in Ebnal and the surrounding area, so nothing has to leave your home. Ebnal is one of 224 places in Cheshire West and Chester we cover. Our jobs stretch from Ebnal to Liverpool (about 27 miles away).
Every address in SY14 is covered. Nearby, we also work in Hampton Heath (1 mile north-east), Malpas (1 mile south-west), No Man's Heath (1 mile south-east), Cuddington Heath (2 miles south-west) and Tushingham (2 miles south-east). We also work in nearby towns such as Chester (12 miles north-west), Winsford (14 miles north-east), Boughton (12 miles north-west), Hoole (12 miles north), Newtown (13 miles north-west) and Over (14 miles north-east).
Near you in Ebnal
Locally, our jobs take us to homes close to Bishop Heber High School, St Oswald's Church and Malpas Alport Endowed Primary School, among other places. Well-known places in the area include Tushingham cum Grindley (2.6 miles south-east) and Castle Hill motte (1.1 miles south-west). Not far away are Bickerton Hill.
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which generally takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Ensure the room can be ventilated
Get a quote
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
What bath repair costs
Prices start from £95. We charge the same across the UK, including Ebnal. What changes the price is:
- The colour and finish to match
- Whether we combine several jobs
- The type of damage
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
Good photos mean an accurate price. Here’s what we find most useful:
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- One picture of the entire bath
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Landlords, agents and businesses in Ebnal
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams in Cheshire West and Chester and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- Wear across the whole surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Towns and villages near Ebnal
Other services in Ebnal
Elsewhere in Cheshire West and Chester
Bath Repair in all 224 places in Cheshire West and Chester
Every service in Cheshire West and Chester
Areas we cover
All about bath chip & crack repair
Questions from Ebnal
How long before I can use the bath?
Normally by the following day, though it depends on what we have done.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
About our accreditations · Every repair comes with a one-year guarantee.
