Angus · Scotland
Bath Repair in Noranside
Bath repair across Noranside and nearby, done in a single visit in most cases.
- Repairs from £95
- Rust spots around the plughole
- A cracked acrylic bath
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Let us know if it has been repaired before
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Bath repair in Noranside without replacing anything
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. We work on cast iron enamel, acrylic and pressed steel enamel, and people most frequently call us about damage done while the bathroom was being fitted and rust spots around the plughole.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Area
- Noranside (DD8)
- Area hub
- Angus
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath repair in Noranside
What happens after I send photos?
You will get a fixed quote back. There is no obligation to book.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
For landlords and businesses
We work for landlords, letting agents and housing providers in Noranside as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
When a repair is not the answer
Before booking, it’s worth knowing the limits too:
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Noranside
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
How we price bath repair
Repairs from £95. Prices are worked out job by job. What matters most is:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- The material
- Access to the area
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- What it’s made of, if you know
- Natural light rather than flash
- Your postcode, so we can check dates
- A clear, close picture of the problem area
Upload a photo of the damage and a wider shot of the entire item, and tell us you are in Noranside, and we’ll reply with a fixed price.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Our work in Noranside
Noranside is about 6 miles north of Forfar, in Angus. Jobs in Noranside are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Noranside is one of 40 places in Angus we cover. Our jobs stretch from Noranside to Edinburgh (56 miles away).
All of DD8 is covered. That includes homes on Oliver Avenue and Woodlands Avenue and the roads around them. If you are just outside Noranside, we cover Tannadice (1 mile south), Aberlemno (4 miles south-east), Lunanhead (5 miles south), Forfar (6 miles south) and Padanaram (6 miles south-west). Larger places within reach include Kirriemuir (7 miles south-west), Brechin (8 miles east), Letham (8 miles south-east), Edzell (9 miles north-east) and Friockheim (10 miles south-east).
Landmarks near Noranside
Around Noranside, we work in homes near Old Parish Church And Churchyard. Further afield, we also cover the area around Vayne Castle (1.4 miles east) and Whitehills Hospital (5.7 miles south).
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Technicians who travel to you, UK-wide
- Everything repaired in place
- Colour-matched on site
- One-year guarantee on every repair
Read our full price list or resurfacing vs replacement cost guide.
More services for Noranside
Aftercare tips
Simple care helps the repair last. Our advice:
- Cover the bath during DIY or decorating
- Have new chips seen to early
- Store metal items away from the bath
- Avoid scourers, wire wool and gritty cream cleaners
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
About our accreditations · Every repair comes with a one-year guarantee.
