Oxfordshire · England
Bath Repair in North Aston
Problem with your bath in North Aston? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Chips caused by builders
Bath repair at your home in North Aston
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our repair technicians work on acrylic, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are a failed DIY repair that’s discoloured or lifting and impact holes in acrylic.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- North Aston (OX25)
- Area hub
- Oxfordshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- A fixed quote before you book
- One price list for the whole UK
- No need to remove anything
- Colour mixed on the day to match
See our pricing or resurfacing vs replacement cost guide.
Common problems we fix in North Aston
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until it cracks.
Most people get in touch when they notice one of these:
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
- A hole punched through by something heavy
- Chips on the rim or sides
What your quote should include
- How to care for the finish
- Who turns up on the day
- What the guarantee covers, and for how long
- How the colour is matched
Nearby places to North Aston
Also in North Aston
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Looking after it afterwards
To keep it looking its best for years:
- Cover the bath during DIY or decorating
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
- Ensure an acrylic bath is firm underfoot
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Landlords, agents and businesses in North Aston
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
If you manage property in North Aston, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
North Aston and nearby
North Aston is about 7 miles south of Banbury, in Oxfordshire. Whether you’re in the middle of North Aston or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 443 towns and villages across Oxfordshire, from the larger towns to small villages. Our jobs stretch from North Aston to Birmingham (about 43 miles away).
Our visits in OX25 are booked in the same way as anywhere else. We regularly work on streets such as The Green and Somerton Road. We also cover the places around North Aston: Dane Hill (1 mile west), Duns Tew (1 mile west), Middle Aston (1 mile south), Deddington (2 miles north) and Steeple Aston (2 miles south). Within a short drive, we also cover Oxford (15 miles south), Banbury (7 miles north), Bicester (8 miles south-east), Witney (14 miles south-west), Kidlington (9 miles south) and Headington Quarry (14 miles south).
Near you in North Aston
Locally, our jobs take us to homes close to Church of St Mary. The closest station to North Aston is Heyford station, roughly 2.7 miles south of the centre. Further afield, we also cover the area around Deddington Castle (1.7 miles north).
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- What kind of damage it is
- What the surface is made of
- How easy the damage is to reach
- Whether we combine several jobs
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Your questions about bath repair in North Aston
How long does the repair take to cure?
Generally within a day, depending on the repair.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
How it works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
