Devon · England

Bath Repair in Northleigh

Bath repair for Northleigh, without a refit. Send us pictures for a fixed price, then book a visit.

  • Repairs from £95
  • Chips along the edge of the bath
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Northleigh?

Repair or replace in Northleigh?

People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.

Why us?

  • No extra charge for your area
  • Everything repaired in place
  • We come to you, anywhere in the UK
  • We leave the room as we found it

See our prices page or resurfacing vs replacement cost guide.

Bath repair in Northleigh, done in place

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. If you’re dealing with damage done while the bathroom was being fitted and damage beneath the taps, we can typically put it right.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.

Rusty chip next to a bath plughole, before and after repair
Location
Northleigh (EX24)
Area hub
Devon
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Common problems we fix in Northleigh

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.

Clients generally contact us about:

  • Chips caused by builders
  • A cracked acrylic bath
  • Rust spots around the plughole
  • A chipped rim or side

What to look for in a quote

  • Whether the colour is mixed to match
  • What protection goes down before work starts
  • A fixed quote, and whether VAT is included
  • Who will actually do the work

Choosing a repair company

What a repair cannot fix

It helps to know what we cannot do:

  • Leaking fittings, which need a plumber
  • Cracks in acrylic we can’t reach from underneath
  • A bath that moves underfoot, until its support is fixed

Send us pictures and we will tell you honestly before booking.

Materials we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel

How the visit works

There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a few hours, depending on the damage.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the following day.

Getting ready for the visit

  • Point us to the nearest place to park
  • Tell us about any previous repairs or coatings
  • Avoid using the area for a few hours before we arrive

Getting a price

For a price in Northleigh, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Get a fixed quote

Advice

Northleigh and nearby

Northleigh is about 4 miles south-east of Honiton, in Devon. Jobs in Northleigh are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover 586 places in Devon.

Our repair technicians cover all of the EX24 postcode area and the streets around it. From Colyton Road and Bucknole Hill Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Farway (1 mile west), Offwell (2 miles north), Widworthy (2 miles north-east), Wilmington (3 miles north-east) and Honiton (4 miles north-west). Larger places within reach include Exmouth (14 miles south-west), Sidmouth (6 miles south-west), Cullompton (13 miles north-west), Seaton (4 miles south-east), Cranbrook (12 miles west) and Axminster (7 miles east).

What’s near Northleigh

Typical jobs here are in homes near Church of St Giles and the streets around them. The closest station to Northleigh is Honiton station, about 3.4 miles north-west of the centre. A little further out are Colcombe Castle (3.3 miles east) and Allhallows Museum (3.6 miles north-west).

Map of Northleigh © OpenStreetMap contributors

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

FAQs for Northleigh

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

What happens next?

We review the photos and send a fixed quote and the next dates we have.

Can you price it without visiting?

Usually, yes. A close-up and a wider photo are enough to give a fixed price.

Will I be able to see the repair?

On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

Are there extra charges for Northleigh?

No. Our quotes include travel, and we charge the same wherever you are.

Can you repair a hole in a bath?

Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Can you redo an old repair?

Regularly. We strip it out, deal with any rust and repair it again.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.

Aftercare tips

After the repair has cured, a few habits help it last:

  • Do not leave razors or cans standing in the bath
  • Get a dripping tap fixed promptly
  • Get any new chip repaired before it rusts
  • Ensure an acrylic bath is firm underfoot

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Repairs by material

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.