Surrey · England
Bath Repair in Norwood Hill
Chip and crack repairs to enamel, acrylic and cast iron baths in Norwood Hill, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips under the taps
- Rust spots around the plughole
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Bath repair at your home in Norwood Hill
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on whirlpool & spa baths, pressed steel enamel and acrylic, and common reasons people get in touch are holes from dropped items and chips caused by builders.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Norwood Hill (RH6)
- Area hub
- Surrey
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath repair in Norwood Hill
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Something went through my bath. Can it be fixed?
Normally. Send us a photo of the hole and one from under the bath if you can.
How long before I can use the bath?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Is there any odour?
There may be a mild smell during the work.
What does bath repair cost?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up and a photo of the whole item with your RH6 postcode.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we will plan for it.
Covering Norwood Hill
Norwood Hill is about 2 miles west of Horley, in Surrey. Wherever you are in the RH6 postcode area, we carry out the work at your property. Our technicians cover 395 places across Surrey, from the larger towns to small villages. Our nearest city page is London, about 23 miles away.
Jobs in RH6 work the same way as everywhere else we cover. Neighbouring places we cover include Nalderswood (1 mile north-west), Charlwood (2 miles south), Cudworth (2 miles south-west), Parkgate (2 miles west) and Russ Hill (2 miles south). Within a short drive, we also cover Epsom (11 miles north), Redhill (5 miles north-east), Ewell (12 miles north), Reigate (4 miles north), Caterham (9 miles north-east) and Dorking (6 miles north-west).
Around Norwood Hill
Locally, our jobs take us to homes close to Edolph's Copse. The closest station to Norwood Hill is Horley station, about 2.8 miles east of the centre. Further afield, we also cover the area around Reigate Castle (4.2 miles north) and Langley Green Hospital (3.6 miles south-east). Not far away are Reigate Heath.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Norwood Hill
- Everything repaired in place
- Honest advice, even when it means no job
- Colour-matched on site
- No extra charge for your area
Read our full price list and resurfacing vs replacement cost guide.
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- What kind of damage it is
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- The material and finish
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with nothing added on the day.
Quotes from your pictures
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
For landlords and businesses
For anyone letting property in or around Norwood Hill, we will quote for several properties at once. Just send photos for each address and we’ll price them together.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
What we cannot put right
We’ll always be straight with you, so here’s what a repair will not do:
- Cracks in acrylic we can’t reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Norwood Hill
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Have new chips seen to early
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
- Avoid scourers, wire wool and gritty cream cleaners
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which generally takes a morning or an afternoon. If we find something your photos didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Get a quote
If you’re in Norwood Hill and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Places near Norwood Hill
Other services in Norwood Hill
About our accreditations · Every repair comes with a one-year guarantee.
