Wolverhampton · England
Bath Repair in Nurton Hill
Damaged bath in Nurton Hill? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Rust spots around the plughole
- Cracks in an acrylic bath
Bath repair in Nurton Hill without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. If you’re dealing with damage done while the bathroom was being fitted and a kit repair that didn’t last, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Nurton Hill (WV6)
- Region
- Wolverhampton
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to care for it.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Advice
What a repair cannot fix
We’d rather lose a job than do one that will not last, so these are the limits:
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Nurton Hill
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Also near Nurton Hill
What else we do in Nurton Hill
Landlord and trade work in Nurton Hill
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
If you manage property in Nurton Hill, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Nurton Hill questions
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
When can I have a bath again?
Usually within a day, though it depends on what we have done.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- If an acrylic bath flexes, have its feet adjusted
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t scrub with anything abrasive
- Rinse it down after each bath
There’s nothing special to do after a repair. Skip bleach and gritty creams.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Prices and what affects them
Repairs from £95. You’ll know the full cost before you book. We look at:
- Access to the area
- What the surface is made of
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, with no extra for Nurton Hill. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- A picture taken from further back
- Any earlier repairs or coatings
- The material, if you know it
- One sharp close-up of the damage
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Where we work around Nurton Hill
Nurton Hill is about 5 miles west of Wolverhampton, in Wolverhampton. We travel to clients in Nurton Hill and nearby villages, so there’s no workshop to go to. We cover all 96 towns and villages across Wolverhampton, from the larger towns to small villages. Our nearest city page is Birmingham, about 17 miles away.
Postcode districts we cover here: WV6. Other places close to Nurton Hill include Westbeech (1 mile north-west), Nurton (1 mile south-east), Pattingham (1 mile south-west), Old Perton (1 mile south-east) and Perton (2 miles east). Larger places within reach include Wolverhampton (5 miles east), Bilston (8 miles east), Coseley (8 miles south-east), Wednesfield (7 miles east), New Invention (9 miles east) and Gornal (7 miles south-east).
What’s near Nurton Hill
Typical jobs here are in homes near Church of St Chad, St Chad's CofE (VC) First School and The Pigot Arms and the streets around them. For rail, the closest station is Codsall station, about 3 miles north-east of the centre. Other landmarks nearby include Tettenhall Transport Heritage Centre (3.7 miles east) and Ryton Castle Hillfield (4.9 miles north-west).
Repair or replace in Nurton Hill?
Swapping a damaged bath for a new one normally means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.
Why us?
- We leave the room as we found it
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- No need to remove anything
Take a look at our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
