Cambridgeshire · England
Bath Repair in Nuthampstead
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Nuthampstead, with a one-year guarantee on every repair.
- Repairs from £95
- Cracks in an acrylic bath
- Chips caused by builders
About our bath repair in Nuthampstead
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include a chipped rim or side and chips caused by builders, in acrylic, roll-top & freestanding and cast iron enamel.
We stand behind the work with a one-year guarantee.
- Area
- Nuthampstead (SG8)
- County
- Cambridgeshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Any earlier repairs that need removing first
- Doing more than one item at once
- Access to the area
- The material
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
Phone pictures are fine. Just make sure we can see:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- One sharp close-up of the damage
Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Nuthampstead, and we’ll reply with a fixed quote.
Places near Nuthampstead
Other services in Nuthampstead
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Do you need bath repair in Nuthampstead?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The most common problems we are called about are:
- Hairline or through cracks in acrylic
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
- Holes from dropped items
Comparing quotes
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
- Whether the colour is mixed to match
About Nuthampstead
Nuthampstead is about 5 miles south-east of Royston, in Cambridgeshire. Clients in Nuthampstead get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Nuthampstead is one of 371 towns and villages in Cambridgeshire where we work. You can also see our page for London, about 35 miles away.
We cover every part of SG8 and the streets around it. If you are just outside Nuthampstead, we cover Anstey (1 mile south), Daw's End (2 miles south), Lower Green (2 miles east), Wyddial (3 miles south-west) and Great Hormead (3 miles south). Further out, we also cover Cambridge (15 miles north), Royston (5 miles north-west), Melbourn (6 miles north), Sawston (11 miles north-east), Linton (12 miles north-east) and Great Kneighton (12 miles north).
Landmarks near Nuthampstead
We visit homes around Church of St George and The Woodman Inn. Other landmarks nearby include The Warren (0.9 miles east). Open spaces near Nuthampstead include Hawkins Wood.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
When a repair is not the answer
To be straight with you, there are a few things a repair will not fix:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
The process
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. It normally takes a morning or an afternoon, and we’ll keep you posted as we go.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the day after.
How to prepare
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
Aftercare tips
Aftercare is simple:
- Get any new chip repaired before it rusts
- Check that an acrylic bath doesn’t move when you stand in it
- Use a soft cloth and washing-up liquid for everyday cleaning
- A dripping tap stains enamel, so fix it early
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
What you get with us
- Everything repaired in place
- Work done at your home or business
- A fixed quote before you book
- One-year guarantee on every repair
See our prices page and resurfacing vs replacement cost guide.
Your questions about bath repair in Nuthampstead
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
When can I have a bath again?
Typically within a day, depending on the repair.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
What happens next?
We come back with a fixed price, typically with dates to choose from. You are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
