Devon · England

Bath chip & crack repair in Olchard, Devon

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Olchard and across Devon. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Damage beneath the taps
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Olchard

Bath repair at your home in Olchard

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Common call-outs are for snagging damage from a refit and impact holes in acrylic, across acrylic, cast iron enamel and pressed steel enamel.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Olchard (TQ12, TQ13)
Area hub
Devon
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

When a repair isn’t the answer

Before booking, it’s worth knowing the limits:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Flexing caused by a failed cradle or loose feet
  • Rust that has eaten right through a steel bath

If in doubt, send photos and we’ll say what we think before you book.

What we work on

  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding

How we price bath repair

Prices start from £95. There is no charge for travel to Olchard. The price comes down to:

  • What the surface is made of
  • Whether it’s a chip, crack, burn or wear
  • How many items we do on one visit
  • Any earlier repairs that need removing first

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A close-up of the damage, in focus
  • Any details about the material
  • One picture of the entire bath
  • Whether it’s been repaired or coated before

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Olchard and nearby

Olchard is about 2 miles north of Kingsteignton, in Devon. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Olchard is one of 586 towns and villages in Devon where we work.

Postcode districts we cover here: TQ12 and TQ13. We also cover the places around Olchard: Ideford (1 mile east), Luton (2 miles east), Humber (2 miles south-east), Kingsteignton (2 miles south) and Ashwell (2 miles south-east). We also work in nearby towns such as Exeter (10 miles north), Exmouth (9 miles east), Newton Abbot (4 miles south), Teignmouth (4 miles south-east), Dawlish (5 miles east) and St Thomas (10 miles north).

Near you in Olchard

We visit homes around Teign School and the streets around them. The nearest railway station is Newton Abbot station, roughly 3.5 miles south of the centre. Well-known places in the area include Bishopsteignton Heritage (2.9 miles south-east) and Newton Abbot Community Hospital (3 miles south). Open spaces near Olchard include Haldon Hill and Chudleigh Knighton Heath.

Map of Olchard © OpenStreetMap contributors

What we do, step by step

There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours, including clearing up.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the following day.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Let us know which floor the room is on
  • Keep children and pets away from the room on the day

Getting a price

To get a price, send two or three pictures through our quote form or call us. We will say immediately if a repair is the right fix.

Get a fixed price

Related advice

Aftercare tips

Looking after the surface is easy:

  • Don’t leave a fresh chip for long
  • Give the bath a quick rinse after use
  • A dripping tap stains enamel, so fix it early
  • Keep abrasive pads and gritty cleaners away from the bath

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

Work for landlords and builders

For anyone letting property in or around Olchard, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

We are used to working with agents and managing companies. Send the address, pictures and access details.

Questions from Olchard

Is the work guaranteed?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Will I be able to see the repair?

On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Which areas do you work in?

We work UK-wide. Our prices are the same everywhere.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is a bath repair permanent?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Repairs by material

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Do you need bath repair in Olchard?

Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.

Customers typically contact us about:

  • A chipped rim or side
  • Rust spots around the plughole
  • A failed DIY repair that is discoloured or lifting
  • Damage beneath the taps

What your quote should include

  • Whether a trained technician does the job
  • What the guarantee covers, and for how long
  • When it can be used again
  • What prep work is covered

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.