Wiltshire · England
Bath Repair for Winterbourne Gunner homes
Damaged bath in Winterbourne Gunner? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Chips on the rim or sides
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
How we handle bath repair in Winterbourne Gunner
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are a chipped rim or side and scuffs and scratches in the surface.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Area
- Winterbourne Gunner (SP4)
- Area hub
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Winterbourne Gunner
More services for Winterbourne Gunner
Common problems we fix in Winterbourne Gunner
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
These are the problems we are asked about most:
- Rust spots around the plughole
- Hairline or through cracks in acrylic
- Damage beneath the taps
- A chipped rim or side
Before you book anyone
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- What aftercare is recommended
- Who turns up on the day
Honest limits
A few problems are outside what a surface repair can do:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About Winterbourne Gunner
Winterbourne Gunner is about 4 miles south of Amesbury, in Wiltshire. Our technicians come to clients in Winterbourne Gunner and nearby villages, so nothing has to leave your home. We work in 425 places across Wiltshire, from the larger towns to small villages. You can also see our page for London, about 76 miles away.
Our visits in SP4 are booked in the same way as anywhere else. From Gomeldon Road, Salt Lane and Horse Barrow or anywhere nearby, we can come to you. If you’re just outside Winterbourne Gunner, we cover Gomeldon (1 mile east), Winterbourne Dauntsey (1 mile south-west), Winterbourne Earls (1 mile south-west), Porton (1 mile north-east) and Idmiston (1 mile north-east). Within a short drive, we also cover Salisbury (4 miles south-west), Amesbury (4 miles north), Bugmore (4 miles south-west), Milford (4 miles south-west), Harnham (5 miles south-west) and Bulford (5 miles north).
Near you in Winterbourne Gunner
Our customers here include homes close to Church of St Mary the Virgin, Gomeldon Primary School and Winterbourne Arms, among other places. The closest station to Winterbourne Gunner is Salisbury station, roughly 4.3 miles south-west of the centre. A little further out are Old Sarum (3.2 miles south-west) and Young Gallery (4 miles south-west). Not far away are Boscombe Down West and Winterbourne Downs RSPB reserve.
Your questions about bath repair in Winterbourne Gunner
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
Why repair rather than replace?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Work done at your home or business
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
See our pricing and resurfacing vs replacement cost guide.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If we find something your photos didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Clear the area around the damage
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
What affects the price in Winterbourne Gunner
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- The material and finish
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- How many areas need work
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Send pictures for a quote
Phone photos are fine, there’s no need for anything special. Ensure they show:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
If you are in Winterbourne Gunner and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
