Cambridgeshire · England
Bath chip & crack repair in Oldeamere, Cambridgeshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Oldeamere, with a one-year guarantee on every repair.
- Repairs from £95
- Holes from dropped items
- Hairline or through cracks in acrylic
Common questions in Oldeamere
Can you repair a crack in an acrylic bath?
Usually, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Do you come to Oldeamere?
Yes. We cover the whole UK and travel to Oldeamere. Send us photos for a fixed quote, or call 0345 017 0787.
When can I have a bath again?
Normally by the following day, depending on the repair.
Are there extra charges for Oldeamere?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
How we handle bath repair in Oldeamere
Most of our bath repairs take a few hours, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. We work on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and people most often call us about impact holes in acrylic and a kit repair that didn’t last.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Oldeamere (PE7)
- County
- Cambridgeshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Related advice
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
If you manage property in Oldeamere, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
Why book with us
- One price list for the whole UK
- Dust sheets down, tidy finish
- A fixed quote before booking
- No need to remove anything
Take a look at our prices page and resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- How many items we do on one visit
- How easy the damage is to reach
- The size and number of damaged areas
- What the surface is made of
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- Any details about the material
- A clear, close picture of the problem area
For a price in Oldeamere, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
When to call us in Oldeamere
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
It’s worth getting a quote if you see:
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
- Chips along the edge of the bath
- Chips caused by builders
Comparing quotes
- What aftercare is recommended
- How changes to the job are handled
- Who will actually do the work
- When it can be used again
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Also in Oldeamere
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Make sure an acrylic bath is firm underfoot
- Do not leave razors or cans standing in the bath
- Clean with warm water and a mild detergent
- Put a towel in the bath if you’re working above it
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Our work in Oldeamere
Oldeamere is about 2 miles east of Whittlesey, in Cambridgeshire. Clients in Oldeamere get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Oldeamere is one of 371 places in Cambridgeshire we cover. We work right across the region, from Oldeamere to London (73 miles away).
Our visits in PE7 work the same way as everywhere else we cover. We also travel to Coates (1 mile north), Eastrea (1 mile west), Eldernell (1 mile north-east), Turves (2 miles east) and Westry (6 miles east). Within a short drive, we also cover Wisbech (13 miles north-east), St Ives (15 miles south), Chatteris (8 miles south-east), Yaxley (8 miles west), Ramsey (7 miles south) and Sawtry (12 miles south-west).
Landmarks near Oldeamere
We visit homes around Church of Holy Trinity, Sir Harry Smith Community College and Coates Primary School and the streets around them. Oldeamere’s nearest station is Whittlesea station, roughly 2 miles west. Green spaces nearby include Lattersey.
About our accreditations · Every repair comes with a one-year guarantee.
