Cambridgeshire · England
Bath Repair in Westry
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Westry and across Cambridgeshire. Free, fixed quotes from your pictures.
- Repairs from £95
- Cracks in an acrylic bath
- Chips caused by builders
Bath repair in Westry without replacing anything
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. We regularly repair acrylic, roll-top & freestanding and cast iron enamel, and people most frequently call us about a chip where the taps sit and scuffs and scratches in the surface.
You get a one-year guarantee, the same in Westry as everywhere else we work.
- Where
- Westry (PE15)
- Area hub
- Cambridgeshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Westry
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Also near Westry
Also in Westry
Prices and what affects them
Repairs from £95. We charge the same across the UK, including Westry. What changes the price is:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- How many areas need work
- Unusual colours or finishes
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
Before you send pictures, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Our prices are the same across the UK, so there is no premium for Westry. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
- Straight answers about what a repair can do
Take a look at our pricing or bath cost comparison.
Landlord and trade work in Westry
We regularly work with letting and managing agents. Send the address, pictures and access details.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
When a repair is not the answer
In fairness, some problems need a different fix:
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take two to three hours for most chips, including clearing up.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
Getting a price
To get a price, send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
How to look after the repair
Once the work has cured, treat it gently:
- Give the bath a quick rinse after use
- Store metal items away from the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you are working above it
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
About Westry
Westry is about 2 miles north-west of March, in Cambridgeshire. Our technicians come to homes and businesses in Westry, so nothing has to leave your home. Westry is one of 371 places in Cambridgeshire where we work. We work right across the region, from Westry to London (74 miles away).
We cover every part of PE15. You’ll find streets such as Wisbech Road, Barley Close and Limetree Close, all of which we cover. Neighbouring places we cover include Chainbridge (2 miles north-east), March (2 miles south-east), Turves (4 miles west), Wimblington (4 miles south) and Eldernell (5 miles west). Further out, we also cover Wisbech (8 miles north-east), Ely (14 miles south-east), Whittlesey (8 miles west), Chatteris (8 miles south), Yaxley (14 miles west) and Littleport (13 miles south-east).
Local landmarks in Westry
Typical jobs here are in homes near Church of St Mary, Ring's End Local Nature Reserve and Neale-Wade Academy. The nearest railway station is March station, about 1.4 miles south-east. Further afield, we also cover the area around March And District Museum (1.8 miles south-east). Open spaces near Westry include Norwood Road.
About our accreditations · Every repair comes with a one-year guarantee.
