Orkney Islands · Scotland
Bath Repair in Orphir
Bath repair in and around Orphir: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- Chips on the rim or sides
Bath repair in Orphir, done in place
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We work on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and people most frequently call us about cracks in an acrylic bath and chips caused by builders.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Orphir (KW17)
- Region
- Orkney Islands
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Rinse the bath after use, especially in hard water areas
- Store metal items away from the bath
- Get any new chip repaired before it rusts
- Keep abrasive pads and gritty cleaners away from the bath
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Where we work around Orphir
Orphir is about 7 miles south-west of Kirkwall, in the Orkney Islands. From the centre of Orphir to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Orphir is one of 51 towns and villages in the Orkney Islands we cover.
We cover every part of the KW17 postcode area and the streets around it. We regularly work on streets such as Kirk Park and Kingfisher Road and the roads around them. If you’re just outside Orphir, we cover Midland (1 mile south-west), Kirbister (2 miles north-east), Clestrain (2 miles west), Germiston (3 miles north) and Stenness (4 miles north-west). Some remote addresses need extra planning, so call us to arrange it.
Around Orphir
Our clients here include homes close to Orphir and the streets around them. The countryside around Orphir includes Loch of Kirbister and Ward Hill.
Signs you need bath repair in Orphir
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Typical reasons for a call-out include:
- Scuffs and scratches in the surface
- Chips on the rim or sides
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
Questions to ask before you book
- What protection goes down before work starts
- What the guarantee covers, and for how long
- If travel is included in the price
- How the colour is matched
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, depending on the damage, and we leave the room as we found it.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the day after, the bath is ready to use.
How to prepare
- Mention any parking restrictions or tricky access
- Ensure the area is dry
- Open a window if you can
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
Also in Orphir
FAQs for Orphir
Do you cover Orphir?
Yes. We work across the UK and come to Orphir and the rest of the Orkney Islands. Send photos and we’ll quote, or call 0345 017 0787.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Which areas do you work in?
The whole UK, including all of the Orkney Islands. Send your postcode with your photos and we’ll confirm dates.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
How much does bath repair cost in Orphir?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why choose Surface Doctor in Orphir
- CHAS and Constructionline accredited
- We leave the room as we found it
- A year’s guarantee on all work
- Everything repaired in place
Take a look at our pricing and guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £95. You won’t pay by the hour. The price is based on:
- How easy the damage is to reach
- The type of damage
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Any details about the material
- One picture of the whole bath
- A clear, close picture of the problem area
- Natural light rather than flash
To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Landlord and trade work in Orphir
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
