Gloucestershire · England
Bath chip & crack repair in Overton, Gloucestershire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Overton, with a one-year guarantee on every repair.
- Repairs from £95
- Chips along the edge of the bath
- Chips caused by builders
What bath repair costs
Prices start from £95. We charge the same across the UK, including Overton. The price reflects:
- What the surface is made of
- Any earlier repairs that need removing first
- How many areas need work
- Unusual colours or finishes
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- Details of any past repairs
- The material, if you know it
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Bath repair in Overton, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the following day. Our repair technicians work on acrylic, pressed steel enamel and whirlpool & spa baths, and people most frequently call us about rusty patches near the plughole and damage beneath the taps.
All our work is covered by our one-year guarantee, wherever you are in Gloucestershire.
- Where
- Overton (GL2)
- County
- Gloucestershire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
It helps to know what we can’t do too:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Aftercare tips
After the repair has cured, a few habits help it last:
- Do not scrub with anything abrasive
- Do not leave razors or cans standing in the bath
- Do not leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
How it works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a few hours, depending on the damage. Before we leave, we explain how soon it can be used and how to care for it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Landlord and trade work in Overton
Landlords, letting agents and housing providers in Overton use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Questions from Overton
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
What areas do you cover?
Everywhere in the UK, Overton included. Travel is included in the price.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What we are called out for in Overton
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Contact us if you’ve noticed:
- Holes from dropped items
- Deep scratches in acrylic
- A cracked acrylic bath
- Snagging damage from a refit
Questions to ask before booking
- How to care for the finish
- Who turns up on the day
- How long the guarantee is and what it covers
- Whether they match the colour on site
Nearby places to Overton
Other services in Overton
About Overton
Overton is about 5 miles south-west of Quedgeley, in Gloucestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Overton is one of 470 towns and villages in Gloucestershire where we work. We work right across the region, from Overton to Birmingham (52 miles away).
Here we cover the GL2 postcode area. Neighbouring places we cover include Framilode (1 mile east), Upper Framilode (1 mile east), Saul (1 mile south-east), Frampton on Severn (2 miles south-east) and Whitminster (3 miles south-east). Further out, we also cover Cheltenham (15 miles north-east), Gloucester (8 miles north-east), Stroud (8 miles south-east), Lansdown (15 miles north-east), Brockworth (11 miles east) and Quedgeley (5 miles north-east).
Local landmarks in Overton
Around Overton, we work in homes near Church of St Mary. A little further out are Dilke Memorial Hospital (5.6 miles west) and Bledisloe Tump (3.1 miles south-west). The countryside around Overton includes WWT Slimbridge.
About our accreditations · Every repair comes with a one-year guarantee.
