Gloucestershire · England
Bath Repair for Whitminster homes
Local bath repair for Whitminster: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Impact holes in acrylic
- Damage beneath the taps
How we handle bath repair in Whitminster
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s a chipped rim or side and impact holes in acrylic, we can usually put it right, on whirlpool & spa baths, roll-top & freestanding and cast iron enamel alike.
All our work is covered by a one-year guarantee, wherever you are in Gloucestershire.
- Location
- Whitminster (GL2)
- County
- Gloucestershire
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Prices start from £95. You’ll know the full cost before booking. We take into account:
- Whether we combine several jobs
- How much damage there is
- How hard the colour is to match
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- A photo taken from further back
- Any details about the material
- Any earlier repairs or coatings
- One sharp close-up of the damage
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say immediately if a repair is the right fix.
FAQs for Whitminster
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Do you cover Whitminster?
We do. We send a technician to Whitminster for every job, and the price is the same as everywhere else.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Nearby places to Whitminster
Also in Whitminster
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Wear across the entire surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Signs you need bath repair in Whitminster
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a picture if you notice any of these:
- A cracked acrylic bath
- Chips on the rim or sides
- Snagging damage from a refit
- A failed DIY repair that is discoloured or lifting
What your quote should include
- Who turns up on the day
- What happens if the damage is worse than the photos show
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
How to look after the repair
After the repair has cured, a few habits help it last:
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
- Put a towel in the bath if you are working above it
- Ensure an acrylic bath is firm underfoot
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Whitminster and nearby
Whitminster is about 4 miles south-west of Quedgeley, in Gloucestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 470 towns and villages across Gloucestershire. Our jobs stretch from Whitminster to Birmingham (about 52 miles away).
Every address in GL2 is covered, from the main roads to the quietest streets. You will find streets such as School Lane, Little Holbury and Parklands Orchard, all of which we cover. We also cover the places around Whitminster: Moreton Valence (1 mile north-east), Westend (1 mile south-east), Nupend (1 mile south-east), Claypits (1 mile south) and Frampton on Severn (2 miles west). We also work in nearby towns such as Cheltenham (14 miles north-east), Gloucester (7 miles north-east), Stroud (5 miles south-east), St Paul's (14 miles north-east), Lansdown (14 miles north-east) and Fairview (14 miles north-east).
Near you in Whitminster
Typical jobs here are in homes near The Whitminster Inn, Whitminster Endowed Church of England Primary School and Church of St Stephen, among other places. The nearest railway station is Stonehouse station, about 2.8 miles south-east. A little further out are Standish Hospital (2.8 miles east) and Haresfield Mount (2.6 miles north-east). The countryside around Whitminster includes WWT Slimbridge and Haresfield Beacon.
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. We charge the same wherever you are, so there’s no premium for Whitminster. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Straight answers about what a repair can do
- Everything repaired in place
- Every repair guaranteed for a year
- Most jobs done in one visit
Read our prices page or bath cost comparison.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
The process
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a few hours, depending on the damage. At the end we talk you through how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Tell us about parking, stairs or access
- Open a window if you can
- Mention if the room is upstairs or in a flat
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
