Buckinghamshire · England
Bath chip & crack repair in Oving, Buckinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Oving and across Buckinghamshire. Send photos for a free, fixed quote.
- Repairs from £95
- Chips on the rim or sides
- A chip where the taps sit
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
Bath repair in Oving, done in place
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. We regularly repair whirlpool & spa baths, pressed steel enamel and cast iron enamel, and common reasons people get in touch are snagging damage from a refit and a hole punched through by something heavy.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Oving (HP22)
- County
- Buckinghamshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Oving questions
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
What does bath repair cost?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Will the repair show?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
When can I have a bath again?
Normally by the following day, depending on the repair.
Oving and nearby
Oving is about 5 miles north of Aylesbury, in Buckinghamshire. Across the HP22 area, a technician comes to you. Oving is one of 263 places in Buckinghamshire we cover. Our jobs stretch from Oving to London (42 miles away).
Our technicians cover all of the HP22 postcode area. From Bowling Alley, The Pightle and Stone View or a nearby road, a technician can come to you. Other places close to Oving include Pitchcott (1 mile south-west), Whitchurch (1 mile east), North Marston (1 mile north-west), Hardwick (2 miles south-east) and Weedon (3 miles south-east). Within a short drive, we also cover Aylesbury (5 miles south), Buckingham (9 miles north-west), Elmhurst (5 miles south-east), Southcourt (6 miles south), Princes Risborough (11 miles south) and Haydon Hill (4 miles south).
Near you in Oving
Typical jobs here are in homes near Whitchurch Combined School, The Black Boy pub and Church of All Saints and the streets around them. For rail, the closest station is Aylesbury Vale Parkway station, roughly 3.8 miles south. Other landmarks nearby include Royal Buckinghamshire Hospital (4.8 miles south) and Bolbec Castle (0.9 miles south-east).
More services for Oving
Honest limits
Before you book, it’s worth knowing the limits too:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
How it works
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes a morning or an afternoon. We leave the room clean and you will know when it can be used.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Read more
How to look after the repair
To keep it looking its best:
- Do not leave a fresh chip for long
- Cover the bath during DIY or decorating
- Rinse it down after each bath
- Clean with warm water and a mild detergent
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Repairing versus replacing in Oving
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
Why book with us
- Technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- Every repair guaranteed for a year
Take a look at our pricing or resurfacing vs replacement cost guide.
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- What kind of damage it is
- Whether we combine several jobs
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
When you take your pictures, a few simple things make all the difference:
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- Where you are, by postcode
- A wider photo showing the entire bath
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
