Liverpool · England

Bath Repair in Page Moss

Bath repair across Page Moss and nearby, normally in one visit and guaranteed for a year.

  • Repairs from £95
  • A kit repair that didn’t last
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Page Moss homes

How we handle bath repair in Page Moss

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We are frequently asked to fix an old repair that has yellowed or come loose and chips caused by builders, across pressed steel enamel, acrylic and cast iron enamel.

Every repair is covered by our one-year guarantee, wherever you are in Liverpool.

Area
Page Moss (L36, L14, L16)
County
Liverpool
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Repair or replace: which is better?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why Page Moss customers choose us

  • Rooms protected and left tidy
  • Technicians who travel to you, UK-wide
  • A fixed quote before you book
  • No need to remove anything

Read our pricing and resurfacing vs replacement cost guide.

What a repair cannot fix

Some jobs are not right for a repair, for example:

  • A steel bath rusted through
  • Water coming from the waste or taps rather than the bath
  • Flexing caused by a failed cradle or loose feet

Send us photos and we’ll tell you honestly before you book.

Materials we work on in Page Moss

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel

How the visit works

Arrival times are agreed in advance. Once we are there, the work takes a few hours for most jobs. The room is left tidy and you’ll know when it can be used.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, generally by the day after, the bath is ready to use.

How to prepare

  • Keep children and pets away from the room on the day
  • Let us know about parking or access
  • Keep a parking space free if you can

How to get a price

Most customers in Page Moss get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a free quote

Read more

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Work for landlords and builders

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

What your bath is made of matters

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.

Page Moss and the surrounding area

Page Moss is about 1 mile west of Huyton with Roby, in Liverpool. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover 52 places across Liverpool, from the larger towns to small villages.

We cover every part of L36, L14 and L16. Jobs here include addresses on Roby Road, Twig Lane and Pilch Lane. Close by, we cover Roby (1 mile east), Huyton with Roby (1 mile east), Dovecot (1 mile west), Huyton (1 mile east) and Knotty Ash (1 mile west). We also work in nearby towns such as Liverpool (3 miles west), Crosby (8 miles north-west), Everton (4 miles west), Orrell (6 miles north-west), Brighton-le-Sands (8 miles north-west) and Wavertree (3 miles west).

Local landmarks in Page Moss

In Page Moss, that means homes near Church of St Bartholomew, Bowring Park and Derby Lodge pub. You will also find Knowsley Park Centre for Learning (0.5 miles east), Huyton Hill Preparatory School (1.3 miles east) and Roby Park Primary School (less than half a mile west). The nearest railway station is Roby station, about 0.5 miles south-east. Well-known places in the area include Much Woolton (1.6 miles south-west) and Liverpool Shopping Park (2.6 miles west). Not far away are Princes Park lake.

Map of Page Moss © OpenStreetMap contributors

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Clean with warm water and a mild detergent
  • If an acrylic bath flexes, have its feet adjusted
  • Keep metal cans and razors off the surface
  • Rinse the bath after use, especially in hard water areas

A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

When to call us in Page Moss

Rust normally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

Common reasons people in Page Moss contact us include:

  • Chips caused by builders
  • Scuffs and scratches in the surface
  • A failed DIY repair that’s discoloured or lifting
  • A hole punched through by something heavy

What to look for in a quote

  • Who will actually do the work
  • Whether the price covers travel
  • What happens if the damage is worse than the pictures show
  • A fixed price, and whether VAT is included

10 questions to ask before booking

Questions from Page Moss

Can you repair several things at once?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What if the damage is worse than the pictures show?

Your quote covers the damage in the photos. If there’s more, we will tell you before starting.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can you redo an old repair?

Yes. We take out the old repair and do it properly. Tell us about it when you send photos.

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Will the repair last?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.