East Riding of Yorkshire · England
Bath Repair in Patrington Haven
Our technicians come to Patrington Haven for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A chip where the taps sit

Aftercare tips
It’s all simple stuff, just a few sensible habits:
- If an acrylic bath flexes, have its feet adjusted
- Avoid scourers, wire wool and gritty cream cleaners
- Put a towel in the bath if you are working above it
- Get any new chip repaired before it rusts
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
How we handle bath repair in Patrington Haven
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. If you’re dealing with a chip where the taps sit and impact holes in acrylic, we can typically put it right, whatever the material.
All of our repairs are guaranteed for twelve months in Patrington Haven and everywhere else. We return to put right any problem with the work.
- Area
- Patrington Haven (HU12)
- Area hub
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026

Repairing versus replacing in Patrington Haven
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. We charge the same wherever you are, so there is no premium for Patrington Haven. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- No need to remove anything
- One visit for most repairs
- A fixed quote before booking
- Same prices wherever you are
See our full price list or resurfacing vs replacement cost guide.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Nearby places to Patrington Haven
More services for Patrington Haven
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Landlords, agents and businesses in Patrington Haven
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Landlords, letting agents and housing providers in Patrington Haven use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Patrington Haven and the surrounding area
Patrington Haven is about 8 miles north of Cleethorpes, in East Riding of Yorkshire. Jobs in Patrington Haven are booked in like any other job: a fixed price from your photos, then a visit to do the work. Patrington Haven is one of 299 places in East Riding of Yorkshire where we work. We work right across the region, from Patrington Haven to Leeds (63 miles away).
Postcode districts we cover here: HU12. We regularly work on streets such as Main Street, Bursall Square and Mulberry Lane. Nearby, we also work in Patrington (1 mile north-east), Welwick (2 miles east), Sunk Island (3 miles south-west), Weeton (3 miles east) and Holmpton (4 miles east). We also work in nearby towns such as Hedon (8 miles north-west), Withernsea (5 miles north-east), Owthorne (5 miles north-east), Preston (9 miles north-west), Keyingham (4 miles north-west) and Bilton (12 miles north-west).
Near you in Patrington Haven
Our clients here include homes close to Patrington CofE Primary Academy. A little further out are Withernsea Hospital (4.6 miles north-east).
Common questions in Patrington Haven
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Are there extra charges for Patrington Haven?
There is no separate call-out charge. The fixed price covers the visit and the work.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
How much does bath repair cost in Patrington Haven?
Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your HU12 postcode.
What areas do you cover?
Everywhere in the UK, Patrington Haven included. There’s no extra charge for travel.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair will not do:
- Leaking fittings, which need a plumber
- A steel bath rusted through
- Acrylic cracks with no access behind them
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Patrington Haven
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
When to call us in Patrington Haven
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The things customers generally mention when they call include:
- A cracked acrylic bath
- Scuffs and scratches in the surface
- Rust by the waste and overflow
- Impact holes in acrylic
What to look for in a quote
- Aftercare advice
- When it can be used again
- What preparation is included
- Who will actually do the work
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on the damage, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Keep children and pets away from the room on the day
- Clear the area around the damage
- Let the surface dry out before the visit
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.

