Surrey · England

Bath Repair for Peaslake homes

Problem with your bath in Peaslake? We repair it in place, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Impact holes in acrylic
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Peaslake homes

Bath repair in Peaslake without replacing anything

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. We are frequently asked to fix rust spots around the plughole and a chip where the taps sit, on whirlpool & spa baths, pressed steel enamel and cast iron enamel.

You get a one-year guarantee, the same in Peaslake as everywhere else we work.

Where
Peaslake (GU5)
Area hub
Surrey
Warranty
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Landlords, agents and businesses in Peaslake

If you manage property in Peaslake, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

The process

Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. Allow a morning or an afternoon.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can typically use the bath the next day.

Before we arrive

  • Point us to the nearest place to park
  • Tell us about parking, stairs or access
  • Clear the area around the damage

Getting a price

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Send pictures for a quote

Related advice

Honest limits

We won’t take on work that won’t last, so these are the limits:

  • Rust that has eaten right through a steel bath
  • Cracks in acrylic we cannot reach from underneath
  • Flexing caused by a failed cradle or loose feet

Send us pictures and we will tell you honestly before booking.

Materials we work on in Peaslake

  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths

Peaslake and nearby

Peaslake is about 6 miles south-west of Dorking, in Surrey. Across the GU5 area, we carry out the work at your property. Peaslake is one of 395 towns and villages in Surrey we cover. Our jobs stretch from Peaslake to London (about 26 miles away).

Our visits in GU5 are booked in the same way as anywhere else. Local streets include Pond Lane, Peaslake Lane and Walking Bottom, all of which we cover. Nearby, we also work in Holmbury St Mary (1 mile east), Farley Green (2 miles west), Pitland Street (2 miles east), Ewhurst (3 miles south) and Ewhurst Green (3 miles south). Within a short drive, we also cover Guildford (7 miles north-west), Woking (10 miles north-west), Epsom (12 miles north-east), Horley (12 miles east), Redhill (12 miles east) and Farnham (15 miles west).

Local landmarks in Peaslake

Around Peaslake, we work in homes near Church of St Mark, Peaslake Free School and Hurtwood House and the streets around them. For rail, the closest station is Gomshall station, about 1.8 miles north. Well-known places in the area include Abinger Castle (1.8 miles east) and St. Luke’s Hospital (5.8 miles north-west). For a walk, there’s Combe Bottom and Leith Hill.

Map of Peaslake © OpenStreetMap contributors

Can I fix it myself?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Prices and what affects them

Repairs from £95. There is no area surcharge for Peaslake. The price reflects:

  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match
  • The material

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Getting a price from pictures

Photographing the damage takes a minute. Try to send:

  • Your postcode, so we can check dates
  • A wider photo showing the entire bath
  • What it’s made of, if you know
  • A close-up of the damage, in focus

Upload a picture of the damage and one of the whole item, with your GU5 postcode, and we will reply with a fixed quote.

Repairs by material

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.

When to call us in Peaslake

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Look out for any of the following:

  • Rust by the waste and overflow
  • A chip where the taps sit
  • A chipped rim or side
  • A hole punched through by something heavy

What to look for in a quote

  • What happens if the damage is worse than the pictures show
  • How long it needs to cure
  • If travel is included in the price
  • Whether they match the colour on site

Choosing a repair company

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Give the bath a quick rinse after use
  • Keep abrasive pads and gritty cleaners away from the bath
  • Have new chips seen to early
  • Fix dripping taps early to stop staining and limescale

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

Questions from Peaslake

Is there a call-out fee?

There is no separate call-out charge. Your fixed price includes everything.

Which areas do you work in?

The entire UK, including all of Surrey. Send your postcode with your pictures and we will offer you dates.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is a bath repair permanent?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.

Can you repair several things at once?

Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Can you redo someone else’s repair?

Yes, we frequently do. It can add a little time, which we include in the quote.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.