Surrey · England
Bath Repair for Holmbury St Mary homes
Damaged bath in Holmbury St Mary? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A hole punched through by something heavy
- An old repair that has yellowed or come loose
Work for landlords and builders
Landlords, letting agents and housing providers in Holmbury St Mary use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
How we handle bath repair in Holmbury St Mary
You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site. Common call-outs are for hairline or through cracks in acrylic and a failed DIY repair that’s discoloured or lifting, in acrylic, pressed steel enamel and roll-top & freestanding.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Holmbury St Mary (RH5)
- County
- Surrey
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Holmbury St Mary
More services for Holmbury St Mary
Holmbury St Mary and the surrounding area
Holmbury St Mary is about 5 miles south-west of Dorking, in Surrey. From the centre of Holmbury St Mary to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Holmbury St Mary is one of 395 places in Surrey where we work. Our nearest city page is London, about 25 miles away.
Postcode districts we cover here: RH5. Streets in the area include Horsham Road and Felday Glade, and we cover them all. Neighbouring places we cover include Pitland Street (1 mile south), Peaslake (1 mile west), Farley Green (3 miles west), Ewhurst (3 miles south) and Ewhurst Green (3 miles south). Larger places within reach include Guildford (8 miles north-west), Woking (11 miles north-west), Epsom (12 miles north-east), Horley (11 miles east), Redhill (11 miles east) and Ewell (13 miles north-east).
Near you in Holmbury St Mary
Around Holmbury St Mary, we work in homes near The Volunteer pub, Belmont Prep School and Hurtwood House. Also close by are St Mary The Virgins Church (less than half a mile south), Peaslake Free School (1.1 miles west) and Wotton and Abinger Commons (1.5 miles east). Holmbury St Mary’s nearest station is Gomshall station, about 2.1 miles north-west. Other landmarks nearby include Mesolithic Museum (0.7 miles north-east) and Abinger Castle (0.7 miles north-east). Not far away are Leith Hill and Silent Pool.
Prices and what affects them
Prices start from £95. We do not charge extra for travel to Holmbury St Mary. The price comes down to:
- The colour and finish to match
- How many items we do on one visit
- How many areas need work
- The type of damage
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Quotes from your pictures
Most quotes are done from pictures alone. To make it quick:
- What it’s made of, if you know
- Any earlier repairs or coatings
- Something in shot to show the size
- Your postcode, so we can check dates
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep metal cans and razors off the surface
- Do not leave a fresh chip for long
- Put a towel in the bath if you’re working above it
- Give the bath a quick rinse after use
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
How the visit works
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow a few hours. Before we go, we will explain how long to leave it and how to care for it.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the next day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Clear the area around the damage
Getting a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say straight away if a repair is the right fix.
Related advice
Holmbury St Mary: your questions answered
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
How long before I can use the bath?
Typically within a day, though it depends on what we have done.
What areas do you cover?
All of Surrey, and the rest of the UK. Travel is included in the price.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
What a repair cannot fix
It helps to know what we can’t do:
- Acrylic cracks with no access behind them
- Wear across the whole surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What we’re called out for in Holmbury St Mary
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex.
Typical reasons for a call-out include:
- Rust by the waste and overflow
- Snagging damage from a refit
- A cracked acrylic bath
- A kit repair that didn’t last
Questions to ask before you book
- What preparation is included
- What protection goes down before work starts
- How to look after the finish
- A fixed price, and whether VAT is included
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
