Leicestershire · England

Bath chip & crack repair in Peckleton Common, Leicestershire

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Peckleton Common and across Leicestershire. Free, fixed quotes from your pictures.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Peckleton Common

Bath repair at your home in Peckleton Common

We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. If you’re dealing with rust by the waste and overflow and an old repair that has yellowed or come loose, we can help.

Whatever the size of the job, it’s backed by a one-year guarantee in Peckleton Common and across Leicestershire.

Location
Peckleton Common (LE9)
County
Leicestershire
Cover
A year, on every repair
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Different materials, different repairs

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Peckleton Common and the surrounding area

Peckleton Common is about 6 miles north-east of Hinckley, in Leicestershire. Customers in Peckleton Common get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Peckleton Common is one of 287 places in Leicestershire where we work. We work right across the region, from Peckleton Common to Birmingham (27 miles away).

Postcode districts we cover here: LE9. If you are just outside Peckleton Common, we cover Desford (1 mile north), Leicester Forest West (1 mile east), Newtown Unthank (2 miles north), Botcheston (3 miles north) and Kirby Muxloe (3 miles north-east). We also work in nearby towns such as Loughborough (12 miles north), Hinckley (6 miles south-west), Wigston (8 miles east), Coalville (8 miles north), Ashby-de-la-Zouch (12 miles north-west) and Shepshed (11 miles north).

Near you in Peckleton Common

In Peckleton Common, that means homes near Desford Community Primary School, Church of St Mary Magdalene and Bosworth Academy. For rail, the closest station is Narborough station, roughly 4.4 miles south-east. Well-known places in the area include Glenfield Hospital (5.7 miles north-east) and Kirby Muxloe Castle (3.3 miles north-east). Not far away are Croft Hill and Stoney Cove.

Map of Peckleton Common © OpenStreetMap contributors

Prices and what affects them

Repairs from £95. You will not pay by the hour. The price is based on:

  • Previous DIY repairs that have to come out
  • The type of damage
  • The material
  • How many items we do on one visit

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.

Send pictures for a quote

You can take the photos on your phone. Just ensure we can see:

  • A picture taken from further back
  • The material, if you know it
  • One sharp close-up of the damage
  • Any earlier repairs or coatings

Most customers in Peckleton Common get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

The process

Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, and we leave the room as we found it.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, normally the next day.

Before we arrive

  • Clear the area around the damage
  • Plan for the room to be out of bounds to pets and children
  • Mention if the room is upstairs or in a flat

Ask for a price

Upload pictures of the damage and a wider shot of the entire item, and tell us you are in Peckleton Common, and we will reply with a fixed quote.

Send photos for a quote

Related advice

Common problems we fix in Peckleton Common

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.

Keep an eye out for any of the following:

  • An old repair that has yellowed or come loose
  • Rust spots around the plughole
  • Chips along the edge of the bath
  • Chips caused by builders

Questions to ask before booking

  • How soon you can use it again
  • Whether a trained technician does the job
  • How the room is protected while they work
  • What happens if the damage is worse than the pictures show

Choosing a repair company

Aftercare tips

Most damage we see is avoidable. These habits help:

  • Get any new chip repaired before it rusts
  • Stick to mild cleaners and a soft cloth
  • Cover the bath during DIY or decorating
  • Rinse it down after each bath

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.

Repair or replace: which is better?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Peckleton Common

  • No need to remove anything
  • Straight answers about what a repair can do
  • Every repair guaranteed for a year
  • Most jobs done in one visit

Read our prices page or bath cost comparison.

Peckleton Common questions

Do the materials smell?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Leicestershire.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is my repair covered?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

When can I have a bath again?

Most baths can be used the next day. We confirm the time before we leave.

Will the repair last?

Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.

Will the price change on the day?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we will do the rest.

When we would advise against a repair

Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:

  • Water coming from the waste or taps rather than the bath
  • A steel bath rusted through
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.