Dudley · England

Bath Repair for Pedmore homes

Bath repair across Pedmore and nearby, usually in one visit.

  • Repairs from £95
  • A kit repair that didn’t last
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Pedmore

About our bath repair in Pedmore

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We’re often asked to fix chips under the taps and chips on the rim or sides, in cast iron enamel, pressed steel enamel and whirlpool & spa baths.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Where
Pedmore (DY9, DY8)
Region
Dudley
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Common problems we fix in Pedmore

Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.

Common reasons people in Pedmore contact us include:

  • A kit repair that didn’t last
  • A chip where the taps sit
  • Impact holes in acrylic
  • Cracks in an acrylic bath

Before you book anyone

  • Whether there are any call-out or travel charges
  • What protection goes down before work starts
  • How soon you can use it again
  • How changes to the job are handled

How to compare quotes

When we would advise against a repair

A repair is not right for every job, including:

  • Cracks in acrylic we can’t reach from underneath
  • A bath worn all over, where resurfacing makes more sense
  • A bath that moves underfoot, until its support is fixed

If in doubt, send pictures and we will say what we think.

What we work on

  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding

Repairing versus replacing in Pedmore

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Why Pedmore customers choose us

  • We’ll tell you if it’s not worth repairing
  • We leave the room as we found it
  • A year’s guarantee on all work
  • Colour mixed on the day to match

Read our prices page or guide to resurfacing and replacement costs.

Our work in Pedmore

Pedmore is about 1 mile south-east of Stourbridge, in Dudley. Jobs in Pedmore are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Pedmore is one of 63 places in Dudley we cover. Our nearest city page is Birmingham, about 10 miles away.

Jobs in DY9 and DY8 are booked in the same way as anywhere else. Whether you live on Ham Lane, Drew Road and Brook Road or a nearby road, we can come to you. Pedmore is on the A491, which makes it straightforward to reach. Other places close to Pedmore include Oldswinford (1 mile north-west), Wollescote (1 mile east), Stourbridge (1 mile north-west), Lye (1 mile north-east) and Norton (1 mile north-west). Larger places within reach include Dudley (5 miles north-east), Halesowen (3 miles east), Kingswinford (4 miles north), Sedgley (6 miles north), Milking Bank (5 miles north) and Hasbury (3 miles east).

Local landmarks in Pedmore

Typical jobs here are in homes near The Pedmore High School, Ham Dingle Primary School and Elmfield Rudolf Steiner School and the streets around them. Other local landmarks include The Crabmill pub (less than half a mile north-west), Mary Stevens Park (1.1 miles north-west) and Parish Church of St Mary (within half a mile north-west). There’s a railway station in Pedmore itself: Stourbridge Junction station. Other landmarks nearby include Lace Guild Museum (2.1 miles north-west) and Corbett Hospital (1.7 miles north). For a walk, there is Stourton Pit and Wychbury Hill.

Map of Pedmore © OpenStreetMap contributors

What bath repair costs

Prices start from £95. Prices are worked out job by job, from your photos. The main factors are:

  • The type of damage
  • Unusual colours or finishes
  • Access to the area
  • Doing more than one item at once

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your pictures

Good photos mean an accurate price. Here’s what helps:

  • What it’s made of, if you know
  • One picture of the whole bath
  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.

Your questions about bath repair in Pedmore

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

What happens after I send pictures?

We come back with a fixed price. There’s no obligation to book.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Is my repair covered?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Do the materials smell?

It depends on the job, but often a little. Open windows and an extractor fan help.

What we do, step by step

The work is clean and fairly quiet. We protect the area first, then the work takes a few hours. Before we leave, we explain the curing time and the aftercare.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, usually the day after.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Tell us about parking, stairs or access
  • Keep pets and children out of the room while we work

Ask for a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a fixed quote

Read more

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Looking after it afterwards

How the surface is treated afterwards matters:

  • Rinse the bath after use, especially in hard water areas
  • Check that an acrylic bath does not move when you stand in it
  • Avoid scourers, wire wool and gritty cream cleaners
  • Keep metal cans and razors off the surface

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.