Carmarthenshire · Wales
Bath chip & crack repair in Pemberton, Carmarthenshire
Bath repair for Pemberton, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Holes from dropped items
Pemberton: your questions answered
Which areas do you work in?
The whole UK, including all of Carmarthenshire. Send your postcode with your photos and we will confirm dates.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can a cracked acrylic bath be fixed?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Bath repair in Pemberton, done in place
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. We are frequently asked to fix chips under the taps and scuffs and scratches in the surface, in pressed steel enamel, acrylic and roll-top & freestanding.
Every repair is covered by our one-year guarantee.
- Location
- Pemberton (SA14, SA15)
- County
- Carmarthenshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Pemberton
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
If you can see any of these, send us a photo:
- Impact holes in acrylic
- Hairline or through cracks in acrylic
- Damage beneath the taps
- Damage done while the bathroom was being fitted
What your quote should include
- A fixed quote, and whether VAT is included
- How the colour is matched
- Aftercare advice
- How long it needs to cure
Where we work around Pemberton
Pemberton is about 1 mile east of Box, in Carmarthenshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 195 towns and villages in Carmarthenshire, from the larger towns to small villages.
Jobs in SA14 and SA15 work the same way as everywhere else we cover. Whether you live on New Road, Capel Road and Havard Road or a nearby road, a technician can come to you. You will find Pemberton on the A484, so it’s easy for us to reach. We also cover the places around Pemberton: Halfway (1 mile south), Capel (1 mile west), Box (1 mile west), Llwynhendy (1 mile south-east) and Cwmcarnhywel (1 mile east). Further out, we also cover Carmarthen (14 miles north-west), Ammanford (10 miles north-east), Burry Port (5 miles west), Betws (10 miles north-east), Pembrey and Burry Port Town (6 miles west) and Achddu (5 miles west).
What’s near Pemberton
Typical jobs here are in homes near Halfway Hotel, St John Lloyd R C School and Halfway C.P. School, among other places. Also close by are St Michael and All Angels Church (within half a mile north) and St. John Lloyd (under half a mile north). The nearest railway station is Llanelli station, roughly 1.4 miles south-west. Nearby you will also find Prince Philip Hospital (0.6 miles north) and Llanelli New Castle (1.3 miles west). For a walk, there’s Bryn Harddfan and WWT Llanelli Wetland Centre.
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Keep pets and children out of the room while we work
- Open a window if you can
- Keep a parking space free if you can
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Advice
How to care for the repair
Most damage we see is avoidable. A few tips:
- Check that an acrylic bath doesn’t move when you stand in it
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
- A dripping tap stains enamel, so fix it early
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why book with us
- Generally one visit, start to finish
- No extra charge for your area
- No need to remove anything
- We come to you, anywhere in the UK
Read our full price list and guide to resurfacing and replacement costs.
What affects the price in Pemberton
Repairs from £95. You will know the full cost before booking. We take into account:
- The material
- Where the damage is and how we get to it
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Where you are, by postcode
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Honest limits
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Pemberton
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Also near Pemberton
What else we do in Pemberton
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
