Cornwall · England
Bath Repair in Phillack
Fixed-price bath repair in Phillack and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Repair technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- A year’s guarantee on all work
- Accredited with CHAS, Constructionline and SafeContractor
Read our pricing and bath cost comparison.
About our bath repair in Phillack
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and common reasons people get in touch are deep scratches in acrylic and hairline or through cracks in acrylic.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Phillack (TR27)
- Area hub
- Cornwall
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Phillack, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you’re in Phillack, and we’ll reply with a fixed price.
Read more
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Keeping it looking good
To keep it looking its best for years:
- Rinse it down after each bath
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
- Get any new chip repaired before it rusts
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How we price bath repair
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- Access to the area
- The type of damage
- The material and finish
- The size and number of damaged areas
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- Something in shot to show the size
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Any earlier repairs or coatings
If you are in Phillack and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Covering Phillack
Phillack is about 1 mile north of Hayle, in Cornwall. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 644 places across Cornwall, from the larger towns to small villages.
Our visits in TR27 are booked in the same way as anywhere else. Streets in the area include Sea Lane, Chapel Lane and Mexico Lane. Other places close to Phillack include Hayle (1 mile south), Foundry (1 mile south-west), Lelant (1 mile south-west), St Erth (2 miles south) and Rose-an-Grouse (2 miles south-west). We also work in nearby towns such as Falmouth (15 miles east), Camborne (5 miles east), Redruth (9 miles east), Penzance (8 miles south-west), Helston (9 miles south-east) and St Ives (3 miles west).
Local landmarks in Phillack
Around Phillack, we work in homes near Bodriggy Academy, Hayle Recreation Ground and Hayle Academy, among other places. Nearby too are St Felicitas and St Piala's Church (less than half a mile north-east) and The Bucket of Blood pub (under half a mile west). The closest station to Phillack is Hayle station, roughly 0.7 miles south-west of the centre. Well-known places in the area include Hayle Heritage Centre (0.9 miles south-west) and St Michael's Hospital (1.2 miles south-west). Not far away are Trink Hill.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Towns and villages near Phillack
Other services in Phillack
Questions from Phillack
Can you repair a hole in a bath?
Typically. Photos of the hole and the underside help us check.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Phillack.
Do you cover Phillack?
Yes. We work across the UK and come to Phillack. Send pictures and we’ll quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
