Somerset · England
Bath chip & crack repair in Pilton, Somerset
Bath repair in and around Pilton: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Rust spots around the plughole
Bath repair in Pilton without replacing anything
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour matched so it blends in. Our technicians work on acrylic, cast iron enamel and roll-top & freestanding, and common reasons people contact us are snagging damage from a refit and scratches you can feel with a fingernail.
You get a one-year guarantee, the same in Pilton as everywhere else we work.
- Area
- Pilton (BA4)
- County
- Somerset
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Looking after the surface is easy:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Put a towel in the bath if you are working above it
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why choose Surface Doctor in Pilton
- Nothing taken out or refitted
- One price list for the whole UK
- One visit for most repairs
- CHAS and Constructionline accredited
Read our full price list or resurfacing vs replacement cost guide.
Towns and villages near Pilton
What else we do in Pilton
Work for landlords and builders
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How we price bath repair
Repairs from £95. There’s no area surcharge for Pilton. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- The size and number of damaged areas
- Any earlier repairs that need removing first
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Details of any past repairs
- Something in shot to show the size
- Your postcode, so we can check dates
- One sharp close-up of the damage
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Let us know about parking or access
- Ensure the room can be ventilated
- Point us to the nearest place to park
Getting a price
For a price in Pilton, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Pilton questions
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you work in Pilton?
Yes. We cover the whole UK and come to Pilton. Send us photos for a fixed quote, or call 0345 017 0787.
Will I be able to see the repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Do you cover the entire of Somerset?
All of Somerset, and the rest of the UK. There is no extra charge for travel.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your photos and we will quote them together.
Pilton and the surrounding area
Pilton is about 4 miles south-east of Wells, in Somerset. Customers in Pilton get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Pilton is one of 640 towns and villages in Somerset where we work.
Every address in BA4 is within our area. From John Beales Hill, Top Street and Ford Lane or a nearby road, we can come to you. We also cover the places around Pilton: West Compton (1 mile north), East Compton (1 mile east), Pylle (2 miles south-east), Croscombe (2 miles north) and Cannard's Grave (2 miles east). Within a short drive, we also cover Yeovil (15 miles south), Frome (12 miles east), Wells (4 miles north-west), Midsomer Norton (9 miles north-east), Street (7 miles south-west) and Glastonbury (6 miles west).
Landmarks near Pilton
Around Pilton, we work in homes near Whitstone School, Crown Inn and Church of St John the Baptist and the streets around them. Well-known places in the area include Mendip Hospital (3.7 miles north).
What we are called out for in Pilton
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
Most people contact us after spotting one of these:
- A failed DIY repair that is discoloured or lifting
- Hairline or through cracks in acrylic
- Snagging damage from a refit
- Chips on the rim or sides
Questions to ask before booking
- What prep work is covered
- What protection goes down before work starts
- How changes to the job are handled
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
