Powys · Wales
Bath chip & crack repair in Pont-y-wal, Powys
Bath repair in Pont-y-wal without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Chips under the taps
- A chipped rim or side
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Bath repair in Pont-y-wal without replacing anything
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you’re dealing with cracks in an acrylic bath and impact holes in acrylic, we can help, on roll-top & freestanding, cast iron enamel and whirlpool & spa baths alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Pont-y-wal (LD3)
- Region
- Powys
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Do not leave razors or cans standing in the bath
- Rinse it down after each bath
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Do you need bath repair in Pont-y-wal?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Send us a photo if you notice any of these:
- Chips along the edge of the bath
- Cracks in an acrylic bath
- Rust spots around the plughole
- Scuffs and scratches in the surface
What to look for in a quote
- What the guarantee covers, and for how long
- What preparation is included
- How the colour is matched
- Aftercare advice
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow a morning or an afternoon, and we will keep you posted as we go.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there is no premium for Pont-y-wal. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Pont-y-wal
- Same prices wherever you are
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- Nothing taken out or refitted
Take a look at our prices page or bath cost comparison.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
- A steel bath rusted through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Pont-y-wal
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Pont-y-wal questions
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
How long before I can use the bath?
Typically the day after. We confirm the time before we leave.
Do you work in Pont-y-wal?
Yes. We work across the UK and travel to Pont-y-wal and the rest of Powys. Send pictures and we’ll quote, or call 0345 017 0787.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Prices and what affects them
Prices start from £95. There is no charge for travel to Pont-y-wal. The price depends on:
- Whether we combine several jobs
- What the surface is made of
- The size and number of damaged areas
- Any earlier repairs that need removing first
The price reflects the work involved, not where you live. You will see the full price before booking.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Where you are, by postcode
- The material, if you know it
- Natural light rather than flash
- A close-up of the damage, in focus
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Covering Pont-y-wal
Pont-y-wal is about 7 miles north-east of Brecon, in Powys. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We cover 234 places across Powys. You can also see our page for Birmingham, about 66 miles away.
Our visits in LD3 are booked in the same way as anywhere else. We also cover the places around Pont-y-wal: Bronllys (1 mile east), Castle Green (1 mile south-east), Llyswen (2 miles north), Bochrwyd (2 miles north) and Boughrood (2 miles north). Larger places within reach include Brecon (7 miles south-west), Llanfair-ym-Muallt (11 miles north-west), Llanfaes (7 miles south-west), Crughywel (12 miles south-east), Pendre (7 miles south-west) and Llanelwedd (12 miles north-west).
What’s near Pont-y-wal
Locally, our jobs take us to homes close to St Mary's Church and The Cock Hotel. Nearby you’ll also find Bronllys Hospital (within half a mile south-east) and Howell Harris Museum (2.1 miles south). Green spaces nearby include Pwll Brechfa and Mintfield Hill.
Towns and villages near Pont-y-wal
What else we do in Pont-y-wal
About our accreditations · Every repair comes with a one-year guarantee.
