Cornwall · England
Bath chip & crack repair in Port Isaac, Cornwall
Bath repair in Port Isaac without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Chips caused by builders
- Hairline or through cracks in acrylic
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Rinse the bath after use, especially in hard water areas
- Protect the bath with a towel when doing jobs nearby
- Do not leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
About our bath repair in Port Isaac
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Our technicians work on pressed steel enamel, acrylic and cast iron enamel, and people most frequently call us about a chipped rim or side and rusty patches near the plughole.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Location
- Port Isaac (PL29)
- Region
- Cornwall
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Port Isaac
Prices start from £95. You’ll know the full cost before you book. We look at:
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- How many items we do on one visit
- How much damage there is
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- Something in shot to show the size
- Natural light rather than flash
- A clear, close picture of the problem area
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Nearby places to Port Isaac
What else we do in Port Isaac
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- No need to remove anything
- A fixed quote before you book
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
Read our prices page or guide to resurfacing and replacement costs.
Your questions about bath repair in Port Isaac
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
Is a holed acrylic bath repairable?
Usually. Photos of the hole and the underside help us check.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Signs you need bath repair in Port Isaac
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Signs it’s time to call us include:
- A hole punched through by something heavy
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- A cracked acrylic bath
What to look for in a quote
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- How the room is protected while they work
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes a few hours, depending on the damage in most cases. We leave the room clean.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Covering Port Isaac
Port Isaac is about 10 miles north-west of Bodmin, in Cornwall. Jobs in Port Isaac are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Port Isaac is one of 644 places in Cornwall we cover.
Jobs in PL29 are booked in the same way as anywhere else. Streets in the area include Trewetha Lane, Hartland Road and New Road, and we cover them all. Neighbouring places we cover include Trelights (1 mile south-west), St Endellion (1 mile south), St Minver (3 miles south-west), Tredrizzick (4 miles south-west) and Pityme (4 miles south-west). Larger places within reach include Bodmin (10 miles south-east), Wadebridge (5 miles south), Nansledan (15 miles south-west), Padstow (6 miles south-west), Lostwithiel (15 miles south-east) and St Columb Major (12 miles south-west).
Landmarks near Port Isaac
Locally, our jobs take us to homes close to St Peter and Port Isaac Community Primary School and the streets around them. A little further out are Doyden Castle (2 miles west). Green spaces nearby include Brea Hill.
What we can’t put right
To be straight with you, some problems need a different fix:
- Leaking fittings, which need a plumber
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
Send us photos and we’ll tell you honestly.
Materials we work on in Port Isaac
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
