Cornwall · England
Bath Repair for St Minver homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in St Minver and across Cornwall. Send pictures for a free, fixed quote.
- Repairs from £95
- Rust by the waste and overflow
- Snagging damage from a refit
Bath repair in St Minver, done in place
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. If you are dealing with snagging damage from a refit and a hole punched through by something heavy, we can help, whatever the material.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- St Minver (PL27)
- County
- Cornwall
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in St Minver
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
You may need us if you’ve spotted:
- Chips along the edge of the bath
- Impact holes in acrylic
- Cracks in an acrylic bath
- Rust by the waste and overflow
What to look for in a quote
- What happens if the damage is worse than the pictures show
- What the guarantee covers, and for how long
- Who will actually do the work
- How to care for the finish
Aftercare tips
Once the work has cured, treat it gently:
- Keep metal cans and razors off the surface
- Protect the bath with a towel when doing jobs nearby
- Check that an acrylic bath does not move when you stand in it
- Rinse the bath after use, especially in hard water areas
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Covering St Minver
St Minver is about 9 miles north-west of Bodmin, in Cornwall. Wherever you are in the PL27 postcode area, we carry out the work at your property. St Minver is one of 644 places in Cornwall where we work.
Our visits in PL27 work the same way as everywhere else we cover. Neighbouring places we cover include Tredrizzick (1 mile south-west), Pityme (1 mile south-west), Trelights (2 miles north-east), St Endellion (2 miles north-east) and Burniere (3 miles south-east). Further out, we also cover Newquay (13 miles south-west), Bodmin (9 miles south-east), Wadebridge (3 miles south-east), Nansledan (13 miles south-west), Boscoppa (15 miles south) and Treninnick (14 miles south-west).
Around St Minver
Around St Minver, we work in homes near St Minver School and Church of St Menefreda and the streets around them. A little further out are Doyden Castle (2.1 miles north) and Shipwreck Museum (3.1 miles south-west). Open spaces near St Minver include Brea Hill.
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- We leave the room as we found it
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
- Colour mixed on the day to match
Read our full price list or resurfacing vs replacement cost guide.
What a repair cannot fix
We will always be straight with you, so here’s what a repair cannot fix:
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we will tell you honestly.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Work for landlords and builders
For anyone letting property in or around St Minver, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It generally takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Open a window if you can
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Read more
Towns and villages near St Minver
Also in St Minver
Questions from St Minver
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
Can you repair a crack in an acrylic bath?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Do you come to St Minver?
Yes, we do. Technicians travel to St Minver from across the region, and the price is the same as everywhere else.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Which areas do you work in?
All of Cornwall, and the rest of the UK. Travel is included in the price.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
