Cumbria · England
Bath Repair for Portinscale homes
Bath repair across Portinscale and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
Landlord and trade work in Portinscale
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Bath repair in Portinscale without replacing anything
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, mixing the colour on the day. Our technicians work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and people most often call us about rust spots around the plughole and a chipped rim or side.
Big or small, you get the same one-year guarantee in Portinscale and across Cumbria.
- Area
- Portinscale (CA12)
- County
- Cumbria
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Portinscale and the surrounding area
Portinscale is about 16 miles east of Workington, in Cumbria. Clients in Portinscale get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We work in all 438 towns and villages across Cumbria. Our jobs stretch from Portinscale to Newcastle upon Tyne (about 66 miles away).
Every address in CA12 is within our area, from the main roads to the quietest streets. From Rickerby Lane, High Portinscale and Howe Lane or a nearby road, we can come to you. Other places close to Portinscale include Cumberland (1 mile north-east), Braithwaite (1 mile west), Keswick (1 mile east), Applethwaite (2 miles north-east) and Ormathwaite (2 miles north-east). Within a short drive, we also cover Maryport (15 miles north-west), Cockermouth (9 miles north-west), Moorclose (15 miles west), Wigton (15 miles north), Cleator Moor (15 miles west) and Seaton (15 miles west).
Landmarks near Portinscale
Our customers here include homes close to Farmers Arms, Braithwaite CofE Primary School and Keswick School and the streets around them. Nearby you’ll also find Derwent Pencil Museum (0.9 miles east). Green spaces nearby include Derwentwater and Latrigg.
Signs you need bath repair in Portinscale
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Typical reasons for a call-out include:
- Scratches you can feel with a fingernail
- Chips under the taps
- Rust by the waste and overflow
- A kit repair that didn’t last
What to look for in a quote
- Who will actually do the work
- Whether cleaning and preparation are in the price
- How your room will be protected
- A fixed quote, and whether VAT is included
Repair or replace in Portinscale?
Swapping a damaged bath for a new one usually means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Rooms protected and left tidy
- One visit for most repairs
- CHAS and Constructionline accredited
- We’ll tell you if it’s not worth repairing
Read our pricing and resurfacing vs replacement cost guide.
What bath repair costs
Prices start from £95. You’ll know the full cost before you book. We take into account:
- How much damage there is
- Whether we combine several jobs
- Access to the area
- What kind of damage it is
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Quotes from your photos
Before you send pictures, these tips help us give you a firm price:
- One picture of the whole bath
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
How it works
We agree an arrival time beforehand. On site, it takes a few hours, depending on the damage. We leave the room clean and you’ll know when it can be used.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Tell us about parking, stairs or access
- Open a window if you can
- Point us to the nearest place to park
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
Common questions in Portinscale
Can you repair a hole in a bath?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a cracked acrylic bath repairable?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Do you work in Portinscale?
Yes. We work across the UK and come to Portinscale. Send us photos for a fixed quote, or call 0345 017 0787.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Places near Portinscale
What else we do in Portinscale
About our accreditations · Every repair comes with a one-year guarantee.
