Liverpool · England
Bath chip & crack repair in Poulton, Liverpool
Bath repair for Poulton, without a refit. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- Scuffs and scratches in the surface
How we handle bath repair in Poulton
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We regularly repair whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and the jobs we see most are deep scratches in acrylic and chips along the edge of the bath.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Poulton (CH44, CH45, CH41)
- Area hub
- Liverpool
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
More services for Poulton
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We clean up when we are done and let you know when you can use it again.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Let us know if it has been repaired before
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Related advice
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Repair or replace in Poulton?
Swapping a damaged bath for a new one generally means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Prices start from £95. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
What you get with us
- Work done at your home or business
- Colour-matched on site
- Honest advice, even when it means no job
- One visit for most repairs
Take a look at our full price list and guide to resurfacing and replacement costs.
What bath repair costs
Prices start from £95. You’ll know the full cost before booking. We look at:
- What kind of damage it is
- The material
- Any earlier repairs that need removing first
- Doing more than one item at once
Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Before you send pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Do you need bath repair in Poulton?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The things clients generally mention when they call are:
- Deep scratches in acrylic
- Chips along the edge of the bath
- Damage beneath the taps
- An old repair that has yellowed or come loose
Before booking anyone
- Aftercare advice
- Who turns up on the day
- What happens if they find more damage
- How your room will be protected
Poulton and the surrounding area
Poulton is about 1 mile south of Wallasey, in Liverpool. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 52 places across Liverpool.
We work across the CH44, CH45 and CH41 postcode area. Jobs here include addresses on Mill Lane, Eric Road and Love Lane. Being close to the A59 and A5027, Poulton is simple for us to get to. We also travel to Wallasey (1 mile north), Seacombe (1 mile east), Egremont (1 mile north-east), Wallasey Village (1 mile north-west) and Bidston (1 mile south-west). We also work in nearby towns such as Liverpool (5 miles east), Crosby (5 miles north), Everton (3 miles east), Orrell (5 miles north-east), Brighton-le-Sands (5 miles north) and Wavertree (5 miles east).
What’s near Poulton
In Poulton, that means homes near Weatherhead High School, St Luke and Rose & Crown pub. You will also find Park Primary School (within half a mile north-east), Liscard School of Science and Art (0.5 miles north-east) and Central Park (within half a mile north-east). The closest station to Poulton is Birkenhead North station, roughly 0.7 miles south-west. A little further out are Marine Point (2 miles north) and David Lewis Northern Hospital (2.3 miles east). The countryside around Poulton includes New Ferry Butterfly Park and New Brighton Marine Lake.
- Parks and local facilities nearby include St Paul's (2.2 miles east)
Keeping it looking good
Simple care helps the repair last. Our advice:
- Check that an acrylic bath doesn’t move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
- Give the bath a quick rinse after use
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Your questions about bath repair in Poulton
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Do you work in Poulton?
Yes. We work across the UK and travel to Poulton. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
How long does the repair take to cure?
Normally within a day, depending on the repair.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
