Hampshire · England
Bath Repair in Quarley
Our repair technicians come to Quarley for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Holes from dropped items
- A kit repair that didn’t last
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
How we handle bath repair in Quarley
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. Whether it’s impact holes in acrylic and snagging damage from a refit, we can usually put it right, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel alike.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Quarley (SP11)
- Region
- Hampshire
- Cover
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Quarley
Quarley is about 6 miles west of Andover, in Hampshire. We travel to clients in Quarley and the surrounding area, so there’s no workshop to go to. We work in all 683 towns and villages in Hampshire, from the larger towns to small villages. Our nearest city page is London, about 69 miles away.
Jobs in SP11 are booked in the same way as anywhere else. Streets in the area include Park Lane and Etwall, and we cover them all. Neighbouring places we cover include Fox (1 mile east), Grateley (1 mile south), Amport (2 miles east), Thruxton (2 miles north-east) and Palestine (2 miles south). Larger places within reach include Andover (6 miles east), Romsey (15 miles south), Hyde (15 miles south-east), Tidworth (4 miles north-west), Weeke (15 miles south-east) and Stanmore (15 miles south-east).
Local landmarks in Quarley
In Quarley, that means homes near Church of St Michael. The nearest railway station is Grateley station, about 1.6 miles south. Further afield, we also cover the area around Ludgershall Castle (4.6 miles north) and Andover War Memorial Hospital (5.3 miles east). The countryside around Quarley includes Winterbourne Downs RSPB reserve and Quarley Hill.
What we cannot put right
A repair is not right for every job, for example:
- Rust that has eaten right through a steel bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Repairs by material
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Your questions about bath repair in Quarley
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
How long before I can use the bath?
Usually the following day. We will tell you the exact curing time when we finish.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
What else we do in Quarley
Signs you need bath repair in Quarley
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
These are the problems we are asked about most:
- Rust by the waste and overflow
- An old repair that has yellowed or come loose
- Chips caused by builders
- Hairline or through cracks in acrylic
Comparing quotes
- Aftercare advice
- What protection goes down before work starts
- If travel is included in the price
- The length of the guarantee and what it covers
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. Allow a few hours, and we’ll tell you if anything changes.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
Getting a price
Send us pictures of the damage and one of the whole item, with your SP11 postcode, and we will come back with a fixed quote.
Related advice
Aftercare tips
So the finish stays in good condition:
- Keep abrasive pads and gritty cleaners away from the bath
- Get a dripping tap fixed promptly
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Repairing versus replacing in Quarley
Swapping a damaged bath for a new one generally means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Quarley. The job itself decides the price: the material, the amount of damage and how many items.
Why Quarley customers choose us
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
- Honest advice, even when it means no job
See our full price list and guide to resurfacing and replacement costs.
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we take into account:
- What the surface is made of
- The type of damage
- Whether we combine several jobs
- Unusual colours or finishes
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
