Hampshire · England
Bath re-enamelling & resurfacing in Quarley, Hampshire
Fixed-price bath re-enamelling in Quarley and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that will not shift
About our bath re-enamelling in Quarley
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Whether it’s a period or roll-top bath worth keeping and a peeling or bubbling previous coating, we can help.
You get a one-year guarantee, the same in Quarley as everywhere else we work.
- Location
- Quarley (SP11)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
About Quarley
Quarley is about 6 miles west of Andover, in Hampshire. Across the SP11 area, we carry out the work at your property. Quarley is one of 683 towns and villages in Hampshire where we work. Our jobs stretch from Quarley to London (69 miles away).
Our visits in SP11 are booked in the same way as anywhere else. Whether you live on Park Lane and Etwall or a nearby road, a technician can come to you. We also cover the places around Quarley: Fox (1 mile east), Grateley (1 mile south), Amport (2 miles east), Thruxton (2 miles north-east) and Palestine (2 miles south). Within a short drive, we also cover Andover (6 miles east), Romsey (15 miles south), Hyde (15 miles south-east), Tidworth (4 miles north-west), Weeke (15 miles south-east) and Stanmore (15 miles south-east).
What’s near Quarley
Our customers here include homes close to Church of St Michael and the streets around them. The nearest railway station is Grateley station, about 1.6 miles south of the centre. Other landmarks nearby include Ludgershall Castle (4.6 miles north) and Andover War Memorial Hospital (5.3 miles east). Not far away are Winterbourne Downs RSPB reserve and Quarley Hill.
More services for Quarley
When a repair is not the answer
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Acrylic that moves when you stand in it
- A bath split right through the body
- A bath that’s rusted through
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Common problems we fix in Quarley
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a picture:
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Comparing quotes
- How your room will be protected
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Quarley clients choose us
- Same prices wherever you are
- Colour-matched on site
- We leave the room as we found it
- Most jobs done in one visit
See our pricing or bath cost comparison.
Looking after it afterwards
Once the work has cured, treat it gently:
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Quarley. The price reflects:
- How hard the colour is to match
- What kind of damage it is
- Any earlier repairs that need removing first
- The material
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your photos
Most quotes are done from photos alone. To help us price it:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
If you are in Quarley and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day in most cases. The room is left tidy and you will know when it can be used.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
Ask for a price
Upload a photo of the damage and a wider shot of the entire item, with your SP11 postcode, and we’ll come back with a fixed quote.
Read more
Questions from Quarley
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
What happens next?
You’ll get a fixed quote back, plus dates. There’s no obligation to book.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
