Calderdale · England

Bath chip & crack repair in Rake, Calderdale

Bath repair in Rake without the cost of replacing. Get a fixed price from your pictures, then book a visit.

  • Repairs from £95
  • Chips on the rim or sides
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Rake

Bath repair at your home in Rake

Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and the jobs we see most are rusty patches near the plughole and holes from dropped items.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.

Location
Rake (HX7)
Region
Calderdale
Guarantee
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

How to look after the repair

Nothing complicated is needed, just a few sensible habits:

  • Get any new chip repaired before it rusts
  • Protect the bath with a towel when doing jobs nearby
  • Clean with warm water and a mild detergent
  • Don’t leave razors or cans standing in the bath

Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.

When we would advise against a repair

We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • Acrylic cracks with no access behind them
  • Leaking fittings, which need a plumber
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel

How the visit works

We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow a morning or an afternoon.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Clear the area around the damage
  • Let us know if it has been repaired before
  • Keep a parking space free if you can

Ask for a price

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Get a free quote

Advice

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.

What bath repair costs

Prices start from £95. Quotes are free and the price is fixed. What we take into account:

  • How many items we do on one visit
  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your pictures

Good pictures mean an accurate price. Here’s what helps:

  • The material, if you know it
  • A picture taken from further back
  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before

If you are in Rake and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Landlords, agents and businesses in Rake

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

We regularly work with letting and managing agents. Send the address, photos and access details.

Do you need bath repair in Rake?

A cracked acrylic bath usually wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.

Look out for these signs:

  • Cracks in an acrylic bath
  • Impact holes in acrylic
  • Chips under the taps
  • Rust spots around the plughole

Before you book anyone

  • How changes to the job are handled
  • Whether the price covers travel
  • Aftercare advice
  • How long the guarantee is and what it covers

How to compare quotes

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Covering Rake

Rake is about 1 mile south of Hebden Bridge, in Calderdale. Jobs in Rake are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our technicians cover all 129 towns and villages in Calderdale, from the larger towns to small villages. We work right across the region, from Rake to Manchester (19 miles away).

Our technicians cover all of HX7 and the streets around it. We regularly work on streets such as Kilnshaw Lane, Pinnacle Lane and Butts Bottom. Neighbouring places we cover include Horsehold (1 mile north-west), Calderside (1 mile north-west), Hebden Bridge (1 mile north), Mytholm (1 mile north-west) and Hebden Royd (1 mile south-east). Within a short drive, we also cover Halifax (6 miles east), Brighouse (10 miles east), Todmorden (3 miles west), Elland (8 miles south-east), Lee Mount (6 miles east) and Pellon (6 miles east).

Around Rake

Locally, our jobs take us to homes close to Hope Baptist Church With Integral Sunday School, Crown Inn and Riverside Junior School. For rail, the closest station is Hebden Bridge station, roughly 0.7 miles north-east. A little further out are Stansfield View Hospital (2.1 miles south-west) and Dobroyd Castle (3.9 miles west). For a walk, there’s Stoodley Pike.

Map of Rake © OpenStreetMap contributors

Rake: your questions answered

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Can a cracked acrylic bath be fixed?

Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.

When can you do it?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

Can pets and children be at home?

Just keep them out of the work area. We’ll tell you when the room can be used again.

What happens if you find more damage?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.