Neath Port Talbot · Wales
Bath Repair for Resolven homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Resolven, with a one-year guarantee on every repair.
- Repairs from £95
- Holes from dropped items
- Scuffs and scratches in the surface
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- How much damage there is
We charge the same wherever you are, so there’s no premium for Resolven. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Details of any past repairs
- Natural light rather than flash
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Bath repair in Resolven, done in place
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. If you’re dealing with chips along the edge of the bath and rust spots around the plughole, we can help, on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding alike.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Resolven (SA11)
- Area hub
- Neath Port Talbot
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Resolven
What else we do in Resolven
Signs you need bath repair in Resolven
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
The things customers typically mention when they call include:
- A failed DIY repair that is discoloured or lifting
- A chip where the taps sit
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
What your quote should include
- Whether there are any call-out or travel charges
- Aftercare advice
- Who turns up on the day
- How long the guarantee is and what it covers
Repair or replace: which is better?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- We come to you, anywhere in the UK
- Fixed prices from your pictures
- CHAS and Constructionline accredited
- One visit for most repairs
Take a look at our pricing and bath cost comparison.
What happens on the day
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the day after.
How to prepare
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Keeping it looking good
Once the work has cured, treat it gently:
- Don’t scrub with anything abrasive
- Clean with warm water and a mild detergent
- Keep metal cans and razors off the surface
- Have new chips seen to early
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Resolven questions
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What does bath repair cost?
Prices start from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your SA11 postcode.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do the materials smell?
Expect a mild smell while we are working.
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Honest limits
Some jobs are not right for a repair, including:
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly.
What we work on
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
About Resolven
Resolven is about 6 miles north-east of Neath, in Neath Port Talbot. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Resolven is one of 100 places in Neath Port Talbot where we work.
Our visits in SA11 work the same way as everywhere else we cover. Streets in the area include Neath Road, Rugby Road and Pentwyn Road. We also travel to Abergarwed (1 mile south-west), Melin-cwrt (1 mile south), Melincourt (1 mile south-west), Creunant (2 miles north-west) and Tre-Forgan (3 miles north-west). We also work in nearby towns such as Neath (6 miles south-west), Port Talbot (9 miles south-west), Sandfields (10 miles south-west), Mount Pleasant (6 miles south-west), Baglan Moors (9 miles south-west) and Sandfields West (10 miles south-west).
Around Resolven
Around Resolven, we work in homes near Farmers Arms and Ynysfach Primary School and the streets around them. Further afield, we also cover the area around Neath Lower (1.9 miles south-west) and Tonna Hospital (3.8 miles south-west). The countryside around Resolven includes Hirfynydd and Llyn Fach.
About our accreditations · Every repair comes with a one-year guarantee.
