Neath Port Talbot · Wales

Shower Tray Repair for Resolven homes

Shower tray repair in Resolven without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • Repairs from £95
  • A dull, stained or worn surface
  • A damaged area around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Resolven

Prices and what affects them

Prices start from £95. We don’t charge extra for travel to Resolven. The price comes down to:

  • Unusual colours or finishes
  • How many areas need work
  • What the surface is made of
  • Previous DIY repairs that have to come out

Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.

How to get a fixed price

When you take your pictures, a few simple things make all the difference:

  • A clear, close picture of the problem area
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare
  • What it’s made of, if you know

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole shower tray, we can give you a fixed price the same day in most cases.

Shower tray repair in Resolven without replacing anything

A cracked or chipped shower tray does not always need replacing. If it’s solid underneath, it can normally be repaired in place, which is far less work than a replacement. We regularly repair enamelled steel, ceramic and stone resin, and common reasons people contact us are a tray that looks tired however much you clean it and damage from a refit or building work.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

Discoloured square shower tray restored with a new white finish
Location
Resolven (SA11)
County
Neath Port Talbot
Cover
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

Landlord and trade work in Resolven

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

About Resolven

Resolven is about 6 miles north-east of Neath, in Neath Port Talbot. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover 100 places across Neath Port Talbot, from the larger towns to small villages.

All of SA11 is within our area. That includes homes on Neath Road, Rugby Road and Pentwyn Road and the roads around them. Close by, we cover Abergarwed (1 mile south-west), Melin-cwrt (1 mile south), Melincourt (1 mile south-west), Creunant (2 miles north-west) and Tre-Forgan (3 miles north-west). We also work in nearby towns such as Neath (6 miles south-west), Port Talbot (9 miles south-west), Sandfields (10 miles south-west), Mount Pleasant (6 miles south-west), Baglan Moors (9 miles south-west) and Sandfields West (10 miles south-west).

Landmarks near Resolven

Around Resolven, we work in homes near Farmers Arms and Ynysfach Primary School. Well-known places in the area include Neath Lower (1.9 miles south-west) and Tonna Hospital (3.8 miles south-west). The countryside around Resolven includes Hirfynydd and Llyn Fach.

Map of Resolven © OpenStreetMap contributors

Common questions in Resolven

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before and we’ll plan for it.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Do you work in Resolven?

Yes. We cover the whole UK and come to Resolven and the rest of Neath Port Talbot. Send us photos for a fixed quote, or call 0345 017 0787.

Can you fix a cracked tray?

In most cases. If the tray moves, the support needs fixing first.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Do you cover the entire of Neath Port Talbot?

We cover the entire UK, including Resolven and the rest of Neath Port Talbot. Just include your postcode and we’ll offer you dates.

What we’re called out for in Resolven

Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On solid floors, cracks typically point to an uneven base.

You may need us if you’ve spotted:

  • Scratches from cleaning or grit
  • Chipped corners or rims
  • A cracked shower tray
  • Chips or cracks by the plughole

Before you book anyone

  • Whether cleaning and preparation are in the price
  • If travel is included in the price
  • How to look after the finish
  • Whether the colour is mixed to match

Choosing a repair company

Why repair rather than replace?

The tray is normally the last thing fitted and the first thing tiled up to, so replacing one disturbs a lot around it. A repair keeps everything as it is. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why choose Surface Doctor in Resolven

  • Free fixed quotes from pictures
  • Colours mixed by hand to suit your surface
  • One-year guarantee on every repair
  • Rooms protected and left tidy

Take a look at our pricing.

Materials and what they mean for the repair

Acrylic

Acrylic trays are lighter and slightly flexible, so good support matters. We repair cracks and scratches.

Stone resin

Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips can be filled and matched.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Keep heavy bottles on a shelf
  • Use a mild, non-abrasive cleaner
  • Rinse away soap after showering
  • Report any creaking or movement early

Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.

If the tray creaks or moves, get it checked, before it cracks or gets worse.

What we do, step by step

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a few hours, or most of the day to resurface the whole tray. We tidy up before we leave and tell you when it’s ready to use.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, usually until the next day.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Have a window or extractor fan available
  • Mention any earlier repairs or resurfacing

How to get a price

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Send photos for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.